Key Takeaways
- Payment does not equal ownership. Just because you paid for the mold does not mean you own it under Chinese law. Get it in writing.
- Tooling ownership and design IP are separate. Own the physical mold and the design rights — both need protection.
- Register your IP. Design patents with CNIPA give you legal recourse beyond just contract claims.
- Mark your tooling. Physically marking molds as your property helps in disputes and bankruptcy situations.
- Audit periodically. Verify your tooling is where it should be and only being used for your products.
- Have an exit plan. Know how you will recover your tooling if the relationship ends badly.
1. Introduction: Your Tooling Is Your Asset — Protect It
For hardware companies manufacturing in China, tooling — the molds, dies, fixtures, and jigs used to produce your product — is one of your most valuable assets. A single complex mold can cost tens or hundreds of thousands of dollars. It represents months of design work, engineering effort, and investment. Yet many foreign companies do not adequately protect their tooling ownership rights in China.
The problem is that tooling ownership is not as straightforward as “I paid for it, so I own it.” Under Chinese law, ownership of custom-made goods depends on what the contract says. If your contract is silent or ambiguous about tooling ownership, you could find yourself in a dispute — with the factory claiming they own the mold, or using it to make products for your competitors.
He Qianggao, a senior lawyer at Geason Law Offices with over 10 years of experience in China manufacturing law (license 14403201310092337), has handled dozens of tooling ownership disputes: “We recently had a client who wanted to move production to a different factory. The original factory refused to release the molds, claiming they owned them because they had designed and built them — even though our client had paid for them in full. The contract only said ’tooling cost: $50,000’ with no ownership clause. It took six months of negotiation to get the molds released, and the client had to pay an additional $15,000. A proper tooling ownership clause would have prevented the entire dispute.”
This guide explains everything you need to know about tooling ownership and mold IP protection in China. It covers legal frameworks, contract provisions, IP registration, common disputes, audit procedures, and how to ensure you truly own and control your tooling.
2. Tooling Ownership: The Legal Framework
2.1 Why Payment Alone Is Not Enough
Many foreign companies assume that if they pay for tooling, they own it. This seems like common sense — but Chinese contract law does not necessarily work that way.
Under the PRC Contract Law (now part of the Civil Code), when a party contracts for custom-made goods, ownership of the finished goods typically transfers upon delivery — but only if the contract does not specify otherwise. Tooling is a special case because:
- Tooling is often designed or co-designed by the factory, which may give them IP claims
- The factory is in possession of the tooling, which gives them de facto control
- Without clear contract language, it is easy for the factory to argue that the tooling payment was just part of the manufacturing cost, not a purchase of the tool itself
- If the factory contributed engineering or design work to the mold, they may claim co-ownership
The bottom line: if you want to own your tooling, you must say so clearly in your contract.
2.2 Different Tooling Ownership Models
There are several common tooling ownership models in Chinese manufacturing:
| Model | Who Pays | Who Owns | Typical Use Case |
|---|---|---|---|
| Buyer-owned tooling | Buyer pays 100% | Buyer owns fully | Custom products, OEM, when buyer has volume |
| Factory-owned tooling | Factory pays | Factory owns | ODM products, when tooling is amortized in unit price |
| Shared tooling | Both contribute | Shared or buyer owns subject to conditions | JDM relationships, high tooling costs |
| Amortized tooling | Factory pays upfront, amortized in unit price | Factory owns, may transfer after certain volume | When buyer cannot afford upfront tooling cost |
| Tooling buy-back | Factory pays initially, buyer can buy at predetermined price | Factory until buy-out, then buyer | ODM to OEM transitions |
Each model has its place, but the key is that the model and ownership must be clearly defined in the contract.
2.3 Tooling vs. Design IP
It is critical to distinguish between two different but related rights:
Tooling ownership (physical property):
- The right to possess, use, and dispose of the physical mold
- Governed by property law and contract law
- Protects your investment in the physical asset
- Does not prevent others from making their own molds of your product (if they have the design)
Design IP ownership (intellectual property):
- The right to prevent others from copying your product design
- Includes design patents, utility models, copyright, and trade secrets
- Governed by IP law
- Protects your design from being copied by competitors
- Does not necessarily give you rights to a specific physical mold
For maximum protection, you need both: you need to own the physical tooling AND the IP rights to the product design. If you only have one, you are exposed.
3. Essential Tooling Contract Provisions
A good manufacturing contract should have a detailed tooling clause that covers at minimum the following:
3.1 Ownership and Title
Clear, unambiguous ownership language:
- “All tooling, molds, dies, fixtures, and jigs paid for by Buyer (the ‘Tooling’) are and shall remain the exclusive property of Buyer.”
- “Seller holds the Tooling in bailment for Buyer and has no ownership interest whatsoever.”
- “Title to Tooling passes to Buyer upon payment in full, regardless of where the Tooling is physically located.”
3.2 Use Restrictions
What the factory can and cannot do with your tooling:
- “Seller shall use the Tooling solely for the manufacture of products for Buyer.”
- “Seller shall not use the Tooling, or any part of it, for any other customer, for Seller’s own products, or for any other purpose.”
- “Seller shall not modify, alter, or duplicate the Tooling without Buyer’s prior written consent.”
3.3 Maintenance and Repair
Who is responsible for tooling upkeep:
- “Seller shall maintain the Tooling in good working condition at Seller’s expense.”
- “Normal wear and tear repairs are Seller’s responsibility; damage due to Seller’s negligence shall be repaired at Seller’s cost.”
- “Major modifications or rebuilds require Buyer’s prior written approval and are at Buyer’s cost, unless caused by Seller’s fault.”
- “Seller shall provide Buyer with periodic tooling condition reports (quarterly or semi-annually).”
3.4 Storage and Security
How the tooling is stored and protected:
- “Seller shall store the Tooling in a secure, climate-controlled environment.”
- “Seller shall label the Tooling clearly as property of Buyer.”
- “Seller shall not move the Tooling from the premises without Buyer’s prior written consent.”
- “Seller shall insure the Tooling against loss or damage at its full replacement value, with Buyer named as loss payee.”
3.5 Tooling Transfer and Recovery
What happens when you want to move the tooling:
- “Buyer has the right to take possession of the Tooling at any time, for any reason, upon reasonable notice.”
- “Upon Buyer’s request, Seller shall promptly make the Tooling available for inspection, removal, or transfer.”
- “Seller shall cooperate fully with any tooling transfer, including providing technical documentation, set-up parameters, and assistance to the receiving party.”
- “Seller may not withhold or lien the Tooling for any reason, including alleged unpaid invoices (separate provisions apply for legitimate payment disputes).”
3.6 Tooling Inventory and Identification
- “Seller shall maintain a complete inventory of all Tooling, including location, condition, and production history.”
- “Each Tooling component shall be marked with Buyer’s name and a unique tooling identification number.”
- “Buyer or its representative has the right to inspect the Tooling at any time during normal business hours.”
3.7 Remedies for Breach
What happens if the factory violates the tooling provisions:
- “Unauthorized use of Buyer’s Tooling is a material breach of this Agreement.”
- “In the event of unauthorized use, Seller shall pay Buyer liquidated damages of [amount] per incident, plus actual damages.”
- “Buyer shall be entitled to injunctive relief to prevent unauthorized use of Tooling.”
- “All tooling provisions survive termination of this Agreement.”
He Qianggao emphasizes: “Liquidated damages are important because they give the contract real teeth. Without them, you have to prove actual damages from unauthorized tooling use, which can be difficult. A well-drafted liquidated damages clause makes the factory think twice before using your mold for a competitor.”
4. IP Protection for Tooling and Product Design
Protecting the physical tooling is important, but you also need to protect the design that the tooling embodies. If someone else can make their own mold from your product design, your tooling ownership is less valuable.
4.1 Design Patents
Design patents protect the ornamental appearance of a product — its shape, configuration, pattern, or color. If your product has a unique visual design, a design patent is one of the best forms of protection.
In China, design patents:
- Are registered with CNIPA (China National Intellectual Property Administration)
- Take 3-6 months to register
- Last for 15 years from filing date
- Have relatively low cost (a few hundred to a few thousand dollars)
- Are examined for formal requirements but not for novelty (unlike invention patents)
- Provide strong protection against copying of the product’s appearance
Important: File your design patent before you publicly disclose the design or start production. If you show the product to factories or at trade shows before filing, you may lose the right to a patent.
4.2 Utility Models
Utility models protect the functional aspects of a product — its structure, shape, or combination. They are sometimes called “mini-patents” because they are quicker and cheaper than invention patents.
Utility models are good for:
- Mechanical structures and mechanisms
- Product shape with functional advantages
- Improvements to existing products
Utility models in China:
- Take 2-4 months to register
- Last for 10 years from filing date
- Lower cost than invention patents
- No substantive examination (only formal examination)
- Can be enforced through courts and administrative actions
4.3 Copyright
Copyright protects artistic and creative works. For product designs, copyright can apply to:
- Product designs with artistic elements (sculptural or decorative features)
- Design drawings and CAD files
- User interfaces and software
Copyright protection in China:
- Automatic upon creation (registration is not required but provides evidence)
- Voluntary registration available through Copyright Protection Center of China
- Lasts for the life of the author plus 50 years (for works for hire: 50 years from publication)
- Useful as a supplement to patent protection
4.4 Trade Secrets
If your tooling design or manufacturing process is not publicly known, it may be protected as a trade secret. Trade secret protection lasts as long as the information remains secret.
To maintain trade secret protection:
- Mark confidential documents as such
- Limit access to confidential information
- Have NDA agreements with all parties who have access
- Implement physical and digital security measures
- Include confidentiality provisions in manufacturing contracts
4.5 Why You Need Multiple Layers of IP Protection
No single form of IP protection is enough. A comprehensive IP strategy for your product and tooling should include:
| IP Type | Protects | Strengths | Limitations |
|---|---|---|---|
| Design patent | Product appearance | Strong, registered, easy to enforce | Only covers appearance, not function |
| Utility model | Functional features | Fast, cheap, good for mechanical products | Only 10 years, may be invalidated |
| Invention patent | Technical innovations | Strongest protection, 20 years | Expensive, slow to grant |
| Copyright | Artistic design + drawings | Automatic, long duration | Only protects against copying |
| Trade secret | Confidential information | No expiration, broad scope | Requires secrecy measures |
5. Mold Registration and Recording
In addition to contract provisions and IP registration, there are specific steps you can take to protect your tooling.
5.1 Physical Marking
Marking your tooling is simple but effective:
- Engrave your company name on the mold base
- Add “Property of [Your Company]” markings
- Include a unique tooling ID number
- Add serial numbers to mold components
- Use tamper-evident seals if storing with the factory
Physical marking helps in several situations:
- If the factory goes bankrupt, marked tooling is easier to identify and recover
- During audits, you can quickly verify your tooling
- In disputes, marked tooling is stronger evidence of ownership
- It deters unauthorized use because the tooling is clearly identified as yours
5.2 Tooling Registration with Authorities
While there is no formal “tooling registration” system in China, you can take steps to create a public record of ownership:
- Customs recordation. If you are exporting products made with your tooling, you can record your IP rights with Chinese Customs. This gives Customs the authority to stop infringing goods from being exported.
- Notarization. Having your tooling ownership agreement notarized by a Chinese notary public adds evidentiary weight in case of disputes.
- IP registration. Design patents and utility models create a public record of your IP rights, which indirectly supports your tooling ownership claim.
5.3 Tooling Inspection and Audit Program
Regular tooling audits ensure your tooling is properly maintained and only used for your products:
Quarterly checks:
- Request photos of the tooling in storage
- Review production records to verify usage matches your orders
- Ask for tooling condition updates
Annual on-site audits:
- Physically inspect the tooling
- Check markings and identification
- Review maintenance records
- Verify storage location and security
- Check for signs of unauthorized use (wear patterns, extra cavities, etc.)
When to audit more frequently:
- After quality issues that might indicate tooling problems
- When you hear rumors about the factory’s financial health
- When the factory has management changes
- When you are considering switching factories
6. Common Tooling Disputes and How to Handle Them
Dispute 1: Factory Refuses to Release Tooling
This is the most common tooling dispute. When you try to move production to another factory, the current factory refuses to release the molds.
Common reasons given:
- “You owe us money” (for alleged additional costs, not the tooling itself)
- “The mold is damaged and needs repair before it can be moved”
- “We own the mold because we designed it”
- “The contract says we can keep it until the end of the agreement”
Prevention:
- Clear tooling ownership and transfer clauses in the contract
- No lien clause — the factory cannot withhold tooling for unrelated debts
- Pre-transfer inspection provisions
Resolution:
- Start with formal written demand, referencing the contract
- Offer to have a neutral third party inspect and document the tooling condition
- If the factory still refuses, consider legal action:
- Send a lawyer’s letter
- File for property preservation (pre-litigation seizure of the tooling)
- File a lawsuit for return of property
- In urgent cases, seek injunctive relief
Dispute 2: Factory Uses Your Tooling for Competitors
You discover your factory is using your molds to make products for your competitors — or selling them directly under their own brand.
How to detect it:
- Find identical products on Alibaba or Amazon from other brands
- Receive reports from customers or industry contacts
- Notice production volumes at the factory exceed your orders
- During audits, find evidence of extra production runs
Prevention:
- Clear use restrictions in the contract
- Liquidated damages for unauthorized use
- Regular tooling audits
- Design patent registration (gives you stronger legal basis)
Resolution:
- Send formal cease-and-desist letter
- Demand accounting of all unauthorized production and profits
- Negotiate settlement with compensation
- If necessary, file lawsuit for:
- Breach of contract
- IP infringement (if you have patents)
- Unfair competition
- Report to local market supervision bureau for administrative enforcement
Dispute 3: Tooling Damage or Disappearance
Your tooling is damaged or goes missing while in the factory’s care.
Prevention:
- Contract provisions requiring proper maintenance and storage
- Insurance requirements (tooling insured at replacement value)
- Regular condition reports
- Clear responsibility allocation for damage
Resolution:
- Document the damage with photos, inspection reports, and expert assessment
- Determine the cause (normal wear? negligence? accident?)
- Review contract provisions for responsibility
- Claim repair or replacement cost from the factory
- If uninsured, demand compensation from the factory
- If the factory disputes, use the dispute resolution mechanism in your contract
Dispute 4: Factory Bankruptcy or Closure
The factory goes out of business and your tooling is at risk of being seized by creditors or sold off.
Prevention:
- Regular financial due diligence on the factory
- Clear tooling ownership with physical marking
- Know where your tooling is located (exact factory, floor, storage area)
- Have a rapid recovery plan
Resolution:
- Act fast — time is critical in bankruptcy situations
- File your ownership claim with the bankruptcy administrator immediately
- Provide evidence: contract, payment records, photos, marking proof
- If possible, physically recover the tooling before formal bankruptcy proceedings
- If the tooling has already been seized, you may need to go through the bankruptcy claims process
He Qianggao warns: “In bankruptcy situations, speed is everything. If you wait until the factory officially files for bankruptcy, it may be too late to recover your tooling — it could already be sold or seized by creditors. We advise clients to have a recovery plan in place: know exactly where their tooling is, have contact information for factory management, and be ready to move quickly at the first sign of trouble.”
7. Tooling Transfer: Moving Molds Between Factories
At some point, you may want to move your tooling from one factory to another. Here is how to do it smoothly:
7.1 The Transfer Process
Preparation:
- Review your contract to confirm ownership and transfer rights
- Give proper notice to the current factory
- Prepare a tooling transfer checklist
- Arrange for the receiving factory to be ready
Inspection:
- Conduct a joint inspection of the tooling at the current factory
- Document condition with photos, measurements, and test shots
- Note any damage or wear
- Both parties sign off on the condition report
Documentation:
- Collect all tooling documentation: mold drawings, set-up parameters, maintenance records, spare parts list
- Get mold flow analysis reports if available
- Confirm all components are present (mold base, cavities, cores, sliders, etc.)
Packing and Shipping:
- Ensure proper packaging to prevent damage during transport
- Use specialized mold moving companies if needed
- Insure the shipment for full replacement value
- Track the shipment
Set-up and Testing at New Factory:
- New factory sets up the mold and runs test shots
- Compare test parts to the reference samples from the old factory
- Adjust parameters as needed
- Run a small trial production to validate quality
- Formal acceptance of the transferred tooling
7.2 Common Transfer Issues
- Condition disputes. The old factory says the mold was fine; the new factory says it is damaged. Solution: joint inspection and condition report before moving.
- Missing components. Small parts, inserts, or documentation go missing. Solution: detailed inventory before transfer.
- Set-up problems. The new factory has trouble getting the mold to run properly. Solution: bring a technician from the old factory to help with set-up (negotiate this as part of the transfer).
- Delay tactics. The old factory drags its feet on releasing the mold. Solution: clear contract terms with deadlines, and be prepared to escalate.
8. Key Takeaways
Tooling is one of your most valuable manufacturing assets, but protecting it in China requires more than just paying for it. You need clear contracts, IP registration, physical marking, regular audits, and contingency plans.
Core principles:
- Payment does not equal ownership. If it is not in the contract, you may not own it — even if you paid for it.
- Tooling ownership and design IP are separate. Protect both. Own the mold AND the design rights.
- Use multiple layers of protection. Contract clauses, IP registration, physical marking, audits — they all work together.
- Register your IP in China. Design patents and utility models give you legal recourse beyond just contract claims.
- Audit your tooling regularly. Do not assume your tooling is fine just because the factory says it is.
- Plan for the end of the relationship. Know how you will recover your tooling if things go wrong.
- Act fast in disputes. Tooling disputes get worse with time. The longer you wait, the harder it is to recover your asset.
At Geason Law Offices, we help foreign hardware companies protect their tooling and IP in Chinese manufacturing. From contract drafting and tooling ownership provisions to IP registration to dispute resolution, He Qianggao and our manufacturing team bring over a decade of experience to help you protect your most valuable manufacturing assets.
FAQ
Q1: What is the difference between OEM and ODM arrangements in China?
A1: OEM (Original Equipment Manufacturing) involves a foreign brand providing product specifications and designs to a Chinese factory that manufactures according to those exact specifications. ODM (Original Design Manufacturing) involves the Chinese factory both designing and manufacturing the product, with the foreign brand typically putting its own label on the finished product. The key legal differences relate to intellectual property ownership, liability for design defects, and the degree of control the brand has over the manufacturing process and quality standards.
Q2: What are the key labor law requirements for manufacturing facilities in China?
A2: Manufacturing facilities in China must comply with comprehensive labor requirements including standard working hours (40 hours/week), overtime pay (150% on weekdays, 200% on rest days, 300% on statutory holidays), mandatory social insurance contributions (pension, medical, unemployment, work injury, maternity), written employment contracts within 30 days of hiring, and workplace safety standards under the Work Safety Law. For factories using dispatch workers, the total proportion of dispatched workers cannot exceed 10% of the total workforce.
Q3: What quality control standards apply to manufactured goods in China?
A3: China has a comprehensive system of quality standards including national standards (GB), industry standards, local standards, and enterprise standards. For many consumer products, compliance with GB standards is mandatory. Products sold in China may also require CCC (China Compulsory Certification) marking depending on the product category. For export products, manufacturers must meet the standards of the destination country. China’s Product Quality Law establishes manufacturer liability for defective products, including compensation for damages caused by quality issues.
Q4: How do I protect my IP when manufacturing in China?
A4: Protecting IP in Chinese manufacturing requires a multi-layered approach: registering trademarks, patents, and copyrights in China (not just in your home country), executing comprehensive manufacturing agreements with clear IP ownership provisions and confidentiality clauses, implementing supply chain controls to prevent overproduction and gray market diversion, conducting regular factory audits, and registering IP with China Customs to prevent unauthorized exports. It’s also important to conduct thorough due diligence on manufacturing partners and to structure agreements with clear dispute resolution mechanisms, preferably with Chinese court jurisdiction or arbitration in China.
Q5: How does China’s environmental regulation affect manufacturing operations?
A5: China’s environmental regulations have become increasingly stringent, particularly under the Environmental Protection Law and the “Dual Carbon” goals. Manufacturing facilities must obtain environmental impact assessments (EIA) before construction, install pollution control equipment, meet emission standards, and participate in the emissions trading system for certain pollutants. Violation penalties have increased significantly and can include daily fines, production suspensions, and even criminal liability for serious environmental pollution incidents.
Further Reading
- Tooling Cost in China: A Complete Guide to Mold Pricing, Payment and Ownership — Tooling cost details
- Hardware IP Strategy in China: Protecting Your Product Design and Technology — IP strategy
- NDA in China Manufacturing: Protecting Your IP Before Production — NDA agreements
- China Manufacturing Contracts: A Guide for Foreign Hardware Companies — Contract essentials
Next Steps
Tooling ownership and mold IP protection are critical for any hardware company manufacturing in China. The cost of getting this wrong — losing your tooling, having it used by competitors, or being unable to switch factories — can be devastating for your business.
Two service lines most relevant for tooling and IP protection:
- Commercial Contracts & Manufacturing Agreements — Tooling clauses in contracts
- IP Protection in China — IP strategy and registration
To discuss tooling ownership or IP protection for your China manufacturing, Contact Geason Law Offices. The initial consultation is free; the form prepares an email in your own mail application.
Related guides in this series
- Injection Molding in China: A Complete Guide for Hardware Startups
- Mold Maintenance & Tooling Lifecycle Management in China Manufacturing
- Supplier Due Diligence & Factory Vetting in China: A Deep Dive
Frequently Asked Questions↑ Back to article
If I pay for the mold, do I automatically own it in China?
No — paying for tooling does not automatically mean you own it under Chinese law. Ownership depends on what your contract says. If your contract is silent on tooling ownership, the factory could claim ownership, especially if they designed or modified the mold. This is a common area of dispute. To ensure you own your tooling, your manufacturing contract must have clear tooling ownership provisions, and ideally you should register the tooling design with the China National Intellectual Property Administration (CNIPA).
How do I protect my tooling from being used by the factory for other customers?
To prevent your factory from using your tooling for competitors: (1) Have a clear contract clause stating the tooling can only be used for your products, (2) Register your design patent or utility model with CNIPA so you have legal recourse, (3) Mark the tooling with your company name and 'property of' designation, (4) Conduct periodic audits to verify the tooling is where it should be and only being used for your orders, (5) Include liquidated damages for unauthorized use to give the contract teeth.
What happens to my tooling if the factory goes out of business?
If the factory goes bankrupt or closes, your tooling could be seized as part of the factory's assets — unless you have clear ownership and can recover it quickly. To protect yourself: (1) Have clear tooling ownership in your contract, (2) Mark tooling clearly as your property, (3) Register ownership if possible, (4) Monitor the factory's financial health, (5) Have a recovery plan — know where the tooling is and how to get it out quickly if needed. In bankruptcy, ownership claims need to be filed promptly with the bankruptcy administrator.
Can I move my mold from one Chinese factory to another?
Yes, you can move your mold to another factory — but only if you actually own it and have the contractual right to do so. The process involves: (1) Confirming ownership in your contract, (2) Giving proper notice to the current factory, (3) Arranging for mold inspection and condition assessment before moving, (4) Coordinating logistics for the mold transfer, (5) Setting up and testing the mold at the new factory. Common obstacles include the factory refusing to release the mold, claiming unpaid invoices, or saying the mold is damaged. A good contract prevents most of these issues.
What is the difference between tooling ownership and design patent ownership?
Tooling ownership means you own the physical mold — the steel, the equipment. Design patent ownership means you own the intellectual property right to the product's design — the shape, appearance, ornamental features. You can own the tooling but not the design patent (e.g., ODM products where the factory owns the design). You can also own the design patent but have the tooling owned by the factory (e.g., if the factory paid for it). Both are important and they are separate legal rights. For maximum protection, you need both.
What are the different tooling ownership models in Chinese manufacturing?
There are several common tooling ownership models. Buyer-owned tooling means the buyer pays 100% and fully owns the mold — the standard for custom OEM products. Factory-owned tooling means the factory pays and owns the tooling, with the cost amortized into the unit price — typical for ODM products. Shared tooling involves both parties contributing, with ownership either shared or owned by the buyer subject to conditions. Amortized tooling means the factory pays upfront and recovers the cost through per-unit pricing, with ownership potentially transferring after a certain volume. Tooling buy-back means the factory pays initially and the buyer can purchase the tooling at a predetermined price later. Each model has trade-offs between upfront cost, control, and ownership.
How do I register a design patent in China for my product?
To protect your product design in China, you should register a design patent with the China National Intellectual Property Administration (CNIPA). A design patent protects the ornamental appearance — the shape, pattern, and color combination of your product. The application process typically takes 3-6 months and is relatively fast and inexpensive compared to invention patents. For maximum protection, file your design patent before you disclose the design to any factory or third party — China operates under a first-to-file system. You should also register utility models for functional features and copyright for any technical drawings. Having registered IP gives you legal recourse beyond just contract claims if the factory copies your product.