A factory visit is the easy part of supplier vetting. The building is usually impressive, the lines are usually running, and the sales team is usually well prepared. The difficult part is the file: who owns the company, whether the entity on the business licence is the entity that will sign the contract, whether the factory is financially able to survive a bad quarter, and whether the permits it holds actually cover the process it runs.
Most foreign buyers do the visit and skip the file, because the visit produces a decision and the file produces questions. That ordering is backwards. The file is cheap, it is fast, and it eliminates most of the suppliers that will later cause trouble before any travel is booked.
The conclusion worth stating at the outset is that due diligence is not an audit. An audit answers whether the factory can make the product. Due diligence answers whether the company can be relied on to keep making it, to keep the information it holds confidential, to pay its workers and its taxes, and to be worth suing if it fails. Those are different questions, answered from different sources, and a programme that answers only the first is a capability check dressed as a risk assessment.
Three questions, three methods
Every supplier decision resolves into three questions, and each is answered by a different instrument.
Can they make it? This is capability, and it is answered by the audit: equipment, process, quality system, engineering depth, capacity and the products they have built before. It is the question buyers ask, and it is the one a factory is best prepared to answer.
Are they what they say they are? This is integrity, and it is answered by document and registry verification: the business licence, the ownership chain, the permits, the litigation record, the certificates and the identity of the people with authority to sign. It is the question that a factory cannot prepare for, because the answer sits in public registers.
Will they still be there? This is resilience, and it is answered by financial analysis and by the operating signals that surround it: revenue trend, leverage, payment behaviour, staff turnover, customer concentration and the age of the equipment.
A supplier can pass the first question and fail the other two. The most expensive failures in Chinese sourcing are rarely technical. They are a factory that was financially hollow, an entity that was a trading company, an owner who was not the person at the meeting, or a permit that did not cover the process being run. All of those are visible before the first purchase order, and none of them is visible on a factory tour.
A scoring framework that produces a decision
Due diligence without a scoring method produces a report that describes a company and leaves the decision to instinct. The framework below produces a number, a set of conditions and a record of why the decision was taken, which matters when the supplier fails two years later and someone asks who approved it.
The framework has two tiers. Gates are pass or fail and are not scored, because some findings cannot be averaged away. Scored dimensions carry weights and are assessed against defined anchors.
| Gate | What it tests | Failure means |
|---|---|---|
| Identity match | The legal name and unified social credit code on the licence match the contracting party, the invoices and the bank account | You are dealing with a different company, or with one that has no assets |
| Registration status | The entity is in existence, not revoked, cancelled, suspended or in liquidation | The contract may be unenforceable against a shell |
| Scope | The business scope covers manufacture of the product, and the site is a production site | A trading company, or production outside the licensed scope |
| Authority | The signatory holds the legal representative position or a valid written authority, and the company seal is controlled | A contract signed without authority is contestable |
| Permits | The environmental approval and discharge permit cover the actual process, including plating, painting, coating or chemical handling where used | Production can be suspended by the regulator at any time |
| Enforcement | No unsatisfied enforcement record, and no listing as a dishonest judgment debtor | Cash is not reaching creditors, and yours will be last in line |
| Insolvency | No bankruptcy or liquidation proceedings | Advance payments and tooling are at risk |
| Dimension | Weight | Evidence that satisfies it | What scores zero |
|---|---|---|---|
| Financial resilience | 25 | Audited accounts for two or three years, bank statements, tax payments, a credit report | No accounts, or accounts that cannot be reconciled to tax filings |
| Operational capability and quality system | 20 | Equipment list, process documentation, certificates with scope, yield and defect data, customer references | No process documentation, or certificates outside their scope |
| Compliance and permits | 15 | Environmental approval, discharge permit, waste contracts, social insurance records, safety records | Permits absent, expired, or for a different process |
| Ownership and control transparency | 15 | Shareholder register, ownership chart to individuals, related-party list, identity of the legal representative | Refusal to explain ownership, or a structure that cannot be traced |
| IP exposure | 15 | Clean litigation record, own portfolio, internal controls, no competing own-brand product | Defendant in infringement proceedings, or an unexplained own-brand clone |
| Commercial conduct and references | 10 | Reference calls, payment behaviour, customer concentration, contract discipline | No references, or references that cannot be reached |
Scoring anchors keep two assessors consistent. A score of five means the evidence is complete, verified at source and shows no adverse finding. Four means complete and verified with minor issues that are explained. Three means adequate evidence with issues that can be managed by condition. Two means material gaps that require remediation before production. One means evidence exists but shows a serious problem. Zero means the evidence is absent or the finding is disqualifying.
Evidence grading runs alongside the score, because a claim is not a document and a document is not a verification. Grade A is verified at the source: the registry entry read directly, the certificate checked on the issuing body’s database, the bank statement seen. Grade B is a verified copy corroborated by a second source. Grade C is a self-declaration or an unverified copy. Grade D is absent. A dimension cannot score above three where its key evidence is grade C, and cannot score above one where it is grade D. This single rule removes most of the optimism that infects supplier scorecards.
| Weighted score | Decision | What it means in practice |
|---|---|---|
| 75 and above, all gates passed | Approve | Standard contract, standard inspection |
| 60 to 74, all gates passed | Approve with conditions | Remediation plan with dates, increased incoming inspection, payment terms weighted to delivery, a personal or parent guarantee where available |
| 45 to 59 | Pilot only | Small orders, no tooling transfer, dual sourcing mandatory before scale |
| Below 45 | Decline | The gaps are structural, not administrative |
| Any gate failure | Decline or defer | Do not average a gate failure against a strong score elsewhere |
A worked example shows how the arithmetic behaves. A mid-sized injection moulder with good equipment, a clean site and strong references, but thin capital and an ownership structure that includes two companies at the same address, scores as follows.
| Dimension | Weight | Score | Weighted | Comment |
|---|---|---|---|---|
| Financial resilience | 25 | 3 | 15 | Accounts provided, but leverage rising and one large customer is 60 per cent of revenue |
| Operational capability | 20 | 4 | 16 | Modern presses, documented process, IATF certificate with the right scope |
| Compliance and permits | 15 | 3 | 9 | Discharge permit current, but social insurance headcount is 20 per cent below the stated payroll |
| Ownership and control | 15 | 2 | 6 | Two related companies at the same address, one of which is a customer |
| IP exposure | 15 | 4 | 12 | No litigation, no own-brand product in the buyer’s category |
| Commercial conduct | 10 | 3 | 6 | References positive on quality, mixed on responsiveness |
| Total | 100 | 64 | Conditional approval: remediation on labour records, a personal guarantee, and a cap on tooling value held at the site |
The number is not the point. The point is that the number is defensible, the conditions follow from the specific findings, and the file records both.
The documents to demand
A document request is a test in itself. A supplier that produces a complete, consistent set within a week is organised. A supplier that produces fragments over a month, with different names and addresses across the set, is telling you something before any analysis begins.
| Document | What it proves | How to verify it | What a fabricated version looks like |
|---|---|---|---|
| Business licence | Legal existence, name, code, scope, address, legal representative, capital | Read the entry on the national enterprise credit system and compare every field | A scan with a different address from the site, or a scope that omits production |
| Articles of association | Shareholding, governance, transfer restrictions, signing rules | Compare with the registry entry and with who actually signs | Generic articles that do not match the registered capital or shareholders |
| Capital verification report | Whether subscribed capital was paid in | Compare with the annual report and the balance sheet | A report for a different amount, or dated before a capital increase |
| Shareholder register and ownership chart | Who ultimately owns and controls the company | Trace to individuals; check for layered holding companies | A chart that stops at an offshore company with no further detail |
| Legal representative identity and authority | Who may bind the company | Compare with the registry; obtain a board resolution and a power of attorney for any other signatory | A signatory described as “general manager” with no written authority |
| Company seal specimen and control rules | Whether the seal is held by the company or by a third party | Ask who physically holds it and where | A seal held by a shareholder’s relative, or by an accountant outside the company |
| Tax registration and taxpayer status | Whether the company is a general VAT taxpayer and how it invoices | Check the certificate and a recent invoice | Invoices issued by a different entity in the group |
| Audited accounts, two or three years | Revenue, margin, leverage, liquidity, related-party balances | Read the auditor’s opinion; reconcile to tax filings and bank statements | A management account presented as audited, or an opinion with a qualification that is not translated |
| Bank statements, six to twelve months | Whether cash actually moves as the accounts suggest | Compare inflows with declared revenue | Statements with the account holder’s name redacted, or from a personal account |
| Tax payment certificates | Whether tax is being paid, and at what scale | Compare with the accounts and the VAT filings | A certificate for a single month presented as annual |
| Social insurance contribution records | Headcount, and whether labour obligations are met | Compare with the payroll and with the stated number of workers | Records for a fraction of the workforce, explained as “temporary workers” |
| Environmental impact approval | Whether the process was approved, and for what capacity | Check the approval document against the actual process and site | An approval for assembly, used to cover a plating line |
| Pollution discharge permit | Whether discharge is permitted, and on what terms | Check the permit register and the permit’s validity | An expired permit, or one for a different pollutant |
| Fire safety acceptance and safety records | Whether the building and the process are accepted | Check the acceptance document and recent inspection records | A document for a different building on the same site |
| Special equipment registration | Whether boilers, pressure vessels, lifts and cranes are registered and inspected | Check the registration plates and the inspection dates | Equipment in use with no plate |
| Quality certificates | Whether the system is certified and what the scope covers | Check the issuing body’s database, including scope and site | A certificate that is genuine but covers a different product or site |
| Export rights and customs registration | Whether the supplier can export in its own name and claim rebates | Check the registration and the customs record | An agent’s registration used as the supplier’s own |
| IP registrations and litigation list | Whether the supplier owns or borrows technology | Check the patent and trademark registers, and the court records | A pending application described as a granted patent |
| Premises title or lease | Whether the site is secure for the duration of the programme | Read the lease term and the landlord’s title | A lease with three months left, or a sublease with no consent |
| Equipment asset list | Whether the equipment is owned and financeable | Check purchase invoices, asset tags and any security registration | Equipment owned by a related company or by the landlord |
| Customer references | Whether the claimed experience is real | Call the second-largest customer, not the nominated one | References that are all from trading intermediaries |
Two practical notes on the request. First, ask in Chinese and for the original documents, not translations. A translated business licence is a courtesy; the Chinese original is the evidence. Second, ask for the set as a single package with an index. The completeness of the index is itself a data point about the company’s document control.
How to verify, source by source
Verification is the step that separates due diligence from document collection. Each source below answers a question that the supplier’s own paperwork cannot.
The national enterprise credit information system. The free official register at gsxt.gov.cn, operated under the market regulator, holds the licence entry, the registration status, the registered capital, the business scope, the legal representative, the establishment date, the registered address, the annual reports and any administrative penalties. It is the starting point and the cross-check for every other document. It does not reliably show ownership beyond the first layer, and the annual report figures are self-reported, so it corroborates rather than proves the financial picture.
The credit and penalty registers. Provincial and municipal credit platforms publish administrative penalties, abnormal operation listings and serious violation listings. A supplier with repeated environmental or product-quality penalties is telling you how it manages compliance when nobody is watching.
The enforcement databases. The Supreme People’s Court maintains a public list of dishonest judgment debtors and a separate record of enforcement cases. A company that appears there has failed to pay a judgment, which is the clearest available signal of a cash problem or a refusal to honour obligations. Check the company and the legal representative separately.
Court judgments. China Judgments Online, at wenshu.court.gov.cn, is useful, but its coverage has become less complete in recent years, so the absence of a record is weak evidence of a clean history. Treat the database as one source, ask the supplier for a litigation warranty in the contract, and where the exposure is material, have counsel run a docket-level check.
The intellectual property registers. CNIPA, the national intellectual property administration, publishes patent and trademark ownership, status, pledges and assignments. Check whether the supplier’s claimed patents are granted or merely applied for, whether they are in force, and whether they are pledged to a bank. A pledged patent tells you the company has borrowed against it.
Certification bodies. A certificate is only as good as its scope. Check the certificate number on the issuing body’s database, confirm the standard, the site, the product scope and the expiry, and confirm that the certification body is accredited for that standard.
Customs. Registration as an exporter, any record of customs violations, and status as an authorised economic operator are all checkable. For a supplier that will export on your behalf, the customs record is a direct measure of administrative competence.
Financial corroboration. Accounts, tax filings, VAT invoices and bank statements should tell the same story at the same scale. If declared revenue is far above the VAT invoiced, the difference needs an explanation; if it is far below, the accounts are understating the business. The reconciliation is not an audit, but it catches the crude fabrications.
The site visit. Documents describe a company; the site shows whether the description is true. Check whether the equipment carries the company’s asset tags or a related company’s, whether the workers wear the company’s uniform, whether the quality and engineering functions are in-house, whether the utility bills and the production volume are consistent, and whether the address on the licence is the address you are standing in.
References. Ask for the second-largest customer rather than the one the supplier nominates, and ask about payment behaviour, change control and how the supplier behaved when something went wrong. A reference that praises quality but cannot describe a single problem is a reference that has been coached.
The on-site audit, and what it is for
The audit exists to test the claims that documents cannot settle: that the process is understood, that the quality system is used rather than displayed, and that the organisation is what it appears to be.
Start away from the production floor. The raw material warehouse shows whether incoming material is segregated, labelled and traceable, and whether anything is stored there that should not be. The quality laboratory shows whether the equipment is calibrated and whether anyone uses it; calibration certificates with dust on them are a finding. The document control room shows whether drawings, specifications and work instructions are revision-controlled, and whether the supervisor can produce the current revision on request. The dormitories and canteen, where they exist, are a proxy for how the company treats people, and treatment correlates with turnover, which correlates with defects. The management offices show whether the company is investing or extracting.
On the floor, follow one product from incoming material to finished goods. At each step, ask for the work instruction, look for the in-process inspection point, check whether defective parts are segregated and labelled, look at the maintenance log for the machine, and ask the operator to explain what they do and why. An operator who can explain the process is evidence of training. An operator who cannot is evidence that the instruction exists only in the folder.
Talk to people who are not the sales team. Ask how long they have worked there, how often they are trained, what happens when they find a quality problem, how overtime is handled and whether pay arrives on time. Workers will not answer candidly in front of management, so the useful conversations happen in the corridor, at the gate or over lunch.
Finally, look at the customer list and the product mix. A factory that already supplies reputable international companies has passed someone else’s audit, which is useful but not sufficient, because the requirements differ. A factory whose only customers are trading intermediaries has never been audited by the end user, which is a different risk.
Financial resilience
A factory that produces a good sample this quarter can fail next quarter. Financial due diligence is about the ability to absorb a shock, not about last year’s profit.
| Indicator | What to look for | Warning sign |
|---|---|---|
| Revenue trend | Stable or growing, with a plausible explanation for growth | A sharp fall, or growth that the customer list does not explain |
| Gross and net margin | Consistent with the industry and with the quoted price | Margins that are thin, negative, or implausibly high for the price quoted |
| Current ratio | Above 1.5, meaning short-term assets cover short-term liabilities | Below 1.0, which is a liquidity problem |
| Debt to equity | Below 1.0 for a manufacturer | Above 2.0, which is high leverage |
| Receivables days | Under about 90 days, consistent with the customer base | Rising days, which means the supplier is financing its customers |
| Inventory turnover | Consistent with the industry | Inventory rising while sales fall, which is the classic distress signal |
| Customer concentration | No single customer above roughly a third of revenue | One customer above half, especially if it is a competitor of yours |
Chinese private companies are not required to publish detailed accounts, so the information has to be requested and then corroborated. Ask for two or three years of audited statements and read the auditor’s opinion; an unqualified opinion is clean, and anything else needs an explanation. Ask for recent tax payment receipts, because a company that pays tax is usually a company with revenue. Ask for a bank reference letter, which is often generic but whose absence is a signal. Where the exposure is large, buy a credit report from an international or local provider, which standardises the financial picture and adds payment behaviour from trade sources.
Registered capital deserves a paragraph of its own because it is so often misread. It is a subscribed figure, not cash in the bank. Since the 2014 reform it does not have to be paid in at incorporation, and later amendments introduced a subscription period within which it must be paid, so the paid-in position has to be checked rather than assumed. Look for the capital verification report, the paid-in figure in the annual report and the corresponding entry in the balance sheet. A company claiming a hundred employees and ten thousand square metres on a nominal capital of half a million renminbi is not necessarily dishonest, but the mismatch requires an explanation, and the explanation is usually that the assets belong to someone else.
Compliance, labour and export rights
Compliance failures migrate into product failures, and then into supply interruptions. A factory that discharges waste without a permit is a factory that can be closed by an inspection on any working day.
Environmental compliance in China has been enforced with increasing severity since 2016, and the penalties run from fines to closure to criminal liability for the individuals responsible. Check the environmental impact approval for the specific process, not for the site in general; the pollution discharge permit and its validity; contracts with licensed waste handlers; the results of recent inspections; and any penalty history. For plating, painting, coating, anodising and chemical processing, verify the specialised permits, because those are the processes that attract enforcement.
Labour compliance matters for three reasons: it is a legal exposure, it predicts turnover, and it is the area where the gap between the paperwork and the reality is widest. Verify social insurance and housing fund contributions for the workforce; written contracts for all workers, which should be in place within thirty days of hiring; overtime within the legal limits, which generally means no more than thirty-six hours a month; safety training and protective equipment; the proportion of dispatched workers, which cannot exceed ten per cent of the workforce; minimum wage compliance; and any history of strikes or collective disputes. A supplier that under-declares its workforce is a supplier that has an unfunded liability, and the liability grows with every year of service.
Certificates should be checked at the issuing body, not on the wall. ISO 9001 is the floor. ISO 14001 covers environmental management. IATF 16949 applies to automotive supply, ISO 13485 to medical devices and AS9100 to aerospace. For product marks, CE, UL and FCC are verified through the relevant databases, as described in the labelling guide. The question is always the same: does the scope of the certificate cover the product you are buying, at the site that will make it?
Export rights are a separate check for suppliers that will ship in their own name. Verify the registration as a foreign trade operator, the customs registration, the absence of customs violations and the tax arrangements for export rebates. A supplier that exports through an agent is not necessarily a problem, but the agent becomes a party to your supply chain, and its reliability is now yours to assess.
IP exposure
Intellectual property diligence answers two questions that are often conflated. The first is whether the supplier has a history of taking other people’s designs. The second is whether your design will be safe once it is in their plant. The first is a search problem. The second is a control problem, and it is the one that determines whether you lose the technology.
On the history, search the court records for infringement proceedings in which the supplier is a defendant, look for accusations of trademark or copyright infringement, and review any contractual disputes about design ownership. Check the supplier’s own portfolio: granted patents suggest engineering, while a portfolio of pending applications that mirror well-known products suggests copying. Look at whether the supplier sells a competing product under its own brand, which is the single strongest predictor of design leakage in consumer hardware.
On the control side, the questions are practical. Who in the factory can open your drawings? Are they on a shared drive, a personal laptop or a controlled system? Do the engineers who work on your product also work on a competitor’s? Are there written confidentiality agreements with the staff who see the files, and are they enforceable in practice? Does the factory permit cameras in the production area, and does it control the removal of samples, scrap and tooling? A factory that cannot answer these questions has not thought about them, and a factory that has not thought about them will lose a file without noticing.
Two limits should be stated plainly. A clean litigation record is not evidence of clean conduct, because most leakage is never litigated: the buyer discovers a similar product two years later and cannot prove where the design came from. And diligence does not substitute for protection. Register the trademark, the patent and the copyright in China rather than only at home, record the IP with customs so that infringing exports can be detained at the border, and put a non-disclosure and non-use agreement in place before the first drawing is sent. Diligence tells you whom to trust with those instruments. It does not replace them.
Red flags that should stop a signature
Some findings are conditions. Some are reasons to walk away. The distinction is worth drawing in advance, because in the middle of a negotiation the temptation is to treat every problem as manageable.
| Red flag | What it usually means | The check that resolves it | Curable? |
|---|---|---|---|
| The licence name does not match the contracting party | You are dealing with a different entity, often one with no assets | Compare the credit code across licence, contract, invoice and bank account | Only by contracting with the correct entity |
| The “factory” is a trading company | No production, and no control over quality or capacity | Business scope, equipment ownership, site visit, headcount | Only by contracting with the real manufacturer |
| The factory rents space inside another plant | A workshop within a host factory, with no independent permits | Lease, permits, utility accounts, the host’s relationship | Rarely, and never without the host’s written consent |
| Nominal capital far below the claimed scale | Thin capitalisation; assets belong to someone else | Paid-in capital, balance sheet, asset ownership | Condition, with guarantees |
| The legal representative changes frequently | A nominee, or a company being used to absorb liabilities | Registration history, other companies held by the same person | Investigate before proceeding |
| The registered address is a virtual office | A shell, or a trading operation with no site | Site visit, utility bills, staff at the address | Investigate |
| Social insurance headcount far below the stated workforce | Undeclared labour and an unfunded liability | Contribution records against payroll and headcount | Condition, but it reveals the compliance culture |
| Refusal to provide accounts or tax records | Something in the numbers | Credit report, bank statements, a shorter payment cycle | Not curable if the refusal persists |
| Unsatisfied enforcement records | Cash crisis, or a refusal to pay judgments | Enforcement database, creditor petitions | Decline |
| Defendant in infringement proceedings | A copying business model | Court records, product comparison, design history | Depends on the finding, and on your own IP exposure |
| An undisclosed related party that is also a customer or a competitor | Diversion, transfer pricing or a competing brand | Ownership chart, transaction list, site visit | Condition, with disclosure and audit rights |
| Payment requested to a personal or third-party account | Fraud, tax evasion, or an entity that cannot receive money | Account name against the licence name | Decline |
| Pressure to sign and pay a large deposit quickly | The classic advance-fee pattern | Slow the process; insist on the file | Decline if the pressure continues |
Three of those rows deserve emphasis because they recur.
The first is the trading company. Many “manufacturers” on sourcing platforms are intermediaries who rent floor space, control no equipment and place your order with a factory you never meet. The consequences are not only price: the intermediary controls quality data, component sourcing and delivery promises, and it disappears from the relationship when a dispute arises. The test is documentary before it is physical: the business scope on the licence either includes production or it does not, and the registered address either matches the site or it does not. Ho Qianggao, a senior lawyer at the firm with more than ten years of manufacturing practice (licence 14403201310092337), describes a client that spent six months qualifying a factory technically before contract review revealed that the “factory” was a trading company renting space in someone else’s plant. A week of registry checking would have found it.
The second is the personal bank account. A request to pay a deposit to an individual, or to a company with a similar but not identical name, is the most reliable fraud signal in the file. It also creates a tax and foreign exchange problem that surfaces later, when the payment cannot be matched to an import declaration.
The third is the undisclosed related party. A supplier whose shareholder also owns the company that supplies its raw material, or the company that buys its output, has a structure that can move profit and quality risk in directions the buyer cannot see. The chart is not a formality; it is the map of where the money goes.
Ongoing monitoring
Due diligence expires. Ownership changes, leverage rises, a key customer leaves, a permit lapses and a legal representative is replaced. A supplier that was approved three years ago is a supplier about whom you have three-year-old information.
The monitoring regime should match the criticality of the supplier. For a strategic supplier, repeat the full assessment annually and review a short set of indicators quarterly: revenue and order volume, payment behaviour, headcount, defect and delivery performance, and any change in ownership or legal representative. For a secondary supplier, a full reassessment every eighteen to twenty-four months is usually enough. For any supplier, trigger an immediate review on a defined event: a change of control, a change of legal representative, a regulatory penalty, a court judgment, a quality failure that requires containment, a request to change payment terms, or a sudden change in price.
Two mechanisms make monitoring practical. The first is an alert on the public registers, which credit services and providers such as China Checkup offer, so that a change of legal representative or a new enforcement record arrives as a notification rather than as a surprise during an audit. The second is the quarterly business review, where the quality, delivery and financial indicators are discussed with the supplier in the same meeting, because a supplier under financial pressure usually shows it first in delivery reliability and then in quality.
Payment behaviour is the most sensitive indicator and the easiest to observe. A supplier that asks for a larger deposit, shortens its credit terms or starts discounting aggressively is telling you something about its cash. The right response is not to refuse, but to ask for the accounts again.
Timing, cost and when to use professionals
A full assessment of a mid-sized supplier usually takes four to eight weeks, most of which is waiting for documents and for an audit slot. The desktop work is fast: registry checks, litigation searches and certificate verification can be done in a few days once the Chinese name and credit code are known. The document collection is the variable, because it depends on how organised the supplier is and how much it wants the business.
| Step | Who does it | Typical timing | What companies miss |
|---|---|---|---|
| Registry, litigation and certificate checks | Counsel or a diligence provider | Three to five working days | That the check must use the Chinese name and the credit code, not the English trading name |
| Document request and collection | Buyer, with counsel reviewing | Two to four weeks | That the request should be issued as an indexed package, and that missing documents are themselves a finding |
| Financial analysis and reconciliation | Counsel or an accountant | One to two weeks | That accounts, tax filings and bank statements must be read together |
| Audit scheduling and site visit | Third-party auditor or the buyer’s quality team | One to two weeks, plus travel | That the audit should follow the desktop work, so that the visit tests hypotheses rather than collecting impressions |
| Reference calls | Buyer | One week | That the nominated reference is the least useful one |
| Scoring, conditions and memo | Counsel, with the buyer | Three to five days | That the decision and its conditions should be recorded before the contract is negotiated, not after |
Professional help pays where the exposure is asymmetric. The triggers are familiar: a first production order above half a million dollars, a relationship expected to last three years or more, a product that embeds proprietary technology, a regulated category such as medical, automotive or aerospace, and any case where the internal team lacks Chinese-language capability. In those situations the cost of a diligence engagement is small relative to a single recall, a single tooling loss or a single year of litigation.
For smaller and simpler engagements, a do-it-yourself approach works if it follows the same order: registry first, documents second, audit third, contract last. What does not work is starting with the audit, because the audit is the most expensive step and the least able to detect the failures that matter most.
Practical checklist
- Obtain the Chinese legal name and the unified social credit code before anything else, and use them for every search.
- Read the registry entry yourself or have it read to you line by line, and compare every field with the documents the supplier provides.
- Confirm that the entity that will sign the contract is the entity that holds the permits, the equipment and the bank account.
- Trace ownership to individuals, and list every company at the same address or with the same legal representative.
- Check the enforcement and dishonest debtor registers for the company and for the legal representative.
- Request two or three years of audited accounts and reconcile them against tax payments and bank statements.
- Verify every certificate on the issuing body’s database, including the scope and the site.
- Confirm the environmental approval and discharge permit cover the actual process, not just the site.
- Compare the social insurance headcount with the stated workforce and the payroll.
- Audit after the desktop work, not instead of it, and walk one product from goods-in to dispatch.
- Score the findings against gates and weighted dimensions, and record the decision, the conditions and the owner of each condition.
- Set register alerts and a review date before the first purchase order is placed.
Geason Law Offices advises foreign companies on supplier qualification in China, from registry and litigation checks through contract terms, audit support and dispute resolution. The relevant service lines are Commercial Contracts & Manufacturing Agreements for the agreements that follow the diligence, and IP Protection in China for the ownership and infringement questions that diligence often uncovers. Two related guides go further on the next steps: China Manufacturing Contracts: A Guide for Foreign Hardware Companies on the drafting, and How to Select and Vet Factories in China: A Complete Sourcing Guide on the sourcing process around it. To discuss a specific supplier or a diligence programme, contact the firm; the first consultation is free and the form prepares an email in your own mail application.
Frequently Asked Questions↑ Back to article
What is the difference between factory selection and supplier due diligence?
Factory selection focuses on finding a capable manufacturing partner with the right equipment, experience, and pricing. Supplier due diligence goes deeper — verifying legal status, financial health, ownership structure, compliance history, IP track record, and operational integrity. Selection answers 'can they make it?' while due diligence answers 'can we trust them?'
How do I verify a Chinese factory's business license?
Verify business licenses through the National Enterprise Credit Information Publicity System (gsxt.gov.cn). Enter the company's Chinese registered name or unified social credit code. Check registration status, registered capital, business scope, legal representative, annual reports, administrative penalties, and whether the company has been listed as an abnormal operation entity. Cross-reference the registered address with the factory address you have been given.
What financial checks should I perform on a Chinese supplier?
Key financial checks include: reviewing audited financial statements (request 2-3 years), checking registered capital vs. paid-in capital, verifying tax registration and compliance, assessing debt ratios and liquidity, checking for liens or asset encumbrances, and confirming the company is not in bankruptcy or liquidation. For larger engagements, consider a professional credit report from agencies like Dun & Bradstreet or local credit bureaus.
How do I check if a factory has IP infringement history?
Search China's court databases (wenshu.court.gov.cn) for IP litigation records. Check the State Intellectual Property Office (CNIPA) database for patent disputes. Look for customs records of IP-related detentions. Check industry forums and review sites for complaints. During the audit, ask about IP policies and review any past disputes. A clean record is important but not sufficient — your contracts must still provide strong IP protection.
What are the most serious red flags in supplier due diligence?
The most serious red flags include: the factory name on the business license does not match the company you are dealing with, registered capital is unrealistically low for the claimed operations, the legal representative frequently changes, multiple administrative penalties for environmental or labor violations, active IP infringement lawsuits, the factory cannot produce ownership documents for its equipment, and undisclosed related-party transactions. Any one of these warrants serious caution.
How do I verify if a Chinese company is a real factory or a trading company?
Many "manufacturers" on sourcing platforms are actually trading companies renting floor space or working as middlemen. To verify, check the business scope on the official business license — pure trading companies will have import/export language but not production or manufacturing language. Cross-reference the registered address with the claimed factory address — mismatches are a common red flag. During on-site audits, check whether the equipment is owned by the company (look at purchase invoices or asset tags), whether workers wear the company uniform, and whether engineering and quality teams are in-house. You can also check tax records and utility bills to confirm actual production activity at the location.
How often should I re-due-diligence my key Chinese suppliers?
Supplier due diligence is not a one-time activity — you should re-verify key suppliers periodically because companies change. For strategic or critical suppliers, conduct full re-due diligence annually, plus quarterly monitoring of key financial and operational indicators. For important secondary suppliers, re-due diligence every 18-24 months is appropriate. You should also trigger immediate re-due diligence after major events like ownership changes, sudden quality declines, financial news, mergers or acquisitions, or regulatory actions. Ongoing monitoring through database alerts, relationship management, and regular factory visits helps you catch issues early before they become crises.