A foreign hardware company usually reaches the point of legal instruction at the worst possible moment. The prototype works, the factory has quoted, and tooling has to start within a fortnight to hold the launch date. The drawings are ready to send. Almost everything described in this article has to happen before that email is sent, and very little of it can be recovered afterwards.
The conclusion is about sequence rather than instruments. China offers a complete set of protections — invention patents, utility models, design patents, trademarks, software copyright, layout design rights and trade secrets — and each is available to a foreign applicant at a price that rarely decides the project. What is not recoverable is time. An application filed after a public disclosure may fail for want of novelty. A trademark filed after the first trade fair may already have been filed by someone who walked the same hall. Information handed to a factory without confidentiality measures is not, in law, a trade secret, whatever the parties call it.
This guide is written to give a general counsel enough structure to instruct Chinese counsel, set a budget and place the work on a product timeline. It follows the four stages at which hardware rights are actually lost: design, tooling, manufacturing and export. The first of those stages, design, is where the cheapest decisions have the largest consequences.
The four assets inside a single product
A connected device is not one asset. It is at least five, each protected by a different instrument, each with a different term, each lost in a different way. Companies typically protect the one they understand — usually the patent on the mechanism — and leave the rest exposed.
| Asset | Instrument | Term | How it is lost |
|---|---|---|---|
| Mechanical and electrical architecture | Invention patent for function and method; utility model for structure | 20 years for invention, 10 for utility model | Demonstration, sale or publication before the filing date |
| Industrial design and screen interfaces | Design patent | 15 years (10 before the 2021 amendment) | Marketing renders or trade-fair photographs published before filing |
| Firmware, embedded software, companion app | Software copyright; trade secret | Long for copyright; indefinite for a secret that stays secret | Unregistered code, open-source contamination, source disclosed to a factory without controls |
| Brand, product name, logo, Chinese-language mark | Trademark | 10 years, renewable | Filed first by a distributor, a factory or an unrelated third party |
| Custom silicon | Layout design right | Separate regime for layout designs | Tape-out and sale without registration |
| Process know-how, yield data, BOM cost, approved-vendor list | Trade secret | Indefinite while confidential | No measures, wide circulation, staff turnover |
The utility model deserves particular attention from hardware teams because it is the only instrument that can be obtained inside a product cycle. It covers the shape and structure of a physical product, it is granted without substantive examination, and it typically issues in six to twelve months. It is weaker than an invention patent, and can be invalidated later if prior art is found, but for a device that will be on the market within a year a granted utility model is worth more than a stronger application still in examination. The usual practice is to file both on the same day and let the invention patent run its two to four years while the utility model does the work in the meantime.
Design patents are the most under-used instrument in the set. For consumer hardware the copy typically reproduces the appearance long before it reproduces the engineering, and appearance is what a buyer recognises. The 2021 amendment extended the term from ten years to fifteen and permitted claims directed to part of a product, which matters where the distinctive element is a camera housing, a hinge or a bezel rather than the whole device. Screen interfaces can be protected as designs in their own right, which is relevant to any product whose value sits in what the display shows.
What to register before the drawings leave the building
Chinese patent law requires novelty, and the applicant’s own disclosure counts against it. The practical consequence is that the factory quotation process is itself a disclosure risk: drawings go to a sales engineer, a process engineer and a tooling shop before anyone has filed. A confidentiality agreement can preserve novelty because a disclosure under an obligation of confidence is not a disclosure to the public, but that argument depends on proving the agreement covered the recipient, the information and the purpose, months or years later. Filing first removes the argument.
The minimum sequence before release is short. File a Chinese application covering the mechanism and the method, file a design application covering the appearance, and file the trademark. If a PCT route is planned, a first filing in the home jurisdiction preserves the priority date for twelve months for patents and utility models and six months for designs, so the Chinese national phase can follow without losing the date. What cannot be done is to disclose now and file later on the assumption that the priority period will be used; the priority period preserves the date of the first filing, not the date of the disclosure.
Filing in China is a drafting exercise, not an administrative one. Chinese counsel needs the technical problem, the solution, the embodiments and the drawings, and will draft claims that Chinese examiners will accept and Chinese courts will construe. A thin specification that describes only the preferred embodiment is a common foreign habit and a common reason why a patent survives examination but fails in litigation, because the court reads the claim against what the specification actually discloses.
Trademarks need more care than companies give them. File the English word mark, the logo, and the Chinese name that the market will actually use. The Chinese name is the one that matters commercially and the one most often left unregistered, because the foreign team does not use it. A competitor or a distributor who registers the Chinese name obtains a right that can be asserted against the brand owner’s own products. File in the classes covering the device, the software and the services sold around it; a hardware company that also runs a subscription service needs the service class, and the class covering retail and e-commerce activity is worth considering if the product will be sold through a platform storefront.
Software copyright registration is inexpensive and fast, typically one to two months, and it produces a certificate that is prima facie evidence of ownership and subsistence. It requires a deposit of source code excerpts and program documentation, which is why companies hesitate, but the deposit is a limited excerpt rather than the whole repository, and the evidentiary value in a dispute is disproportionate to the cost. Register each release that matters, not only the first.
Two chain-of-title points are routinely missed. Employee inventions in China vest in the employer by operation of law, but the inventor retains a statutory right to a reward and to a share of the proceeds, and a contract that ignores that obligation leaves a claim outstanding at the worst moment — during a financing or an exit. Where the industrial design, the mechanical engineering or the app was produced by a third-party studio, the assignment has to be in writing and has to cover copyright as well as design right; a Chinese studio’s standard terms frequently retain ownership and grant only a licence to the delivered files.
The drawings themselves are worth marking. Each page should carry the recipient’s name, the release date and a confidentiality legend, and the release log should record what went to whom. That log is what turns a pile of CAD files into evidence of a trade secret.
Firmware, source code and the non-patent layer
Firmware is where connected hardware companies are most exposed and least protected. The code carries the differentiation, the factory needs part of it to test and flash, and the factory’s engineers are the people most likely to leave. A patent on the mechanism does nothing for a competitor who copies the firmware behaviour.
The first measure is separation. The factory needs test firmware, jig software and flashing instructions. It does not need the source, the production keys, the calibration algorithms or the model weights. Supply binaries with the debug interface disabled, and keep the signing keys and the per-device credentials under the company’s own control. Where production keys have to be injected at the factory, inject them through a controlled process with an auditable record of every unit, rather than by handing over a key file.
Device identity is the specific risk that distinguishes connected hardware from ordinary consumer goods. A factory that can generate valid device credentials can build units that the company’s own cloud will authenticate, and the result is not a cosmetic copy but a functioning clone with access to the service. The defences are technical before they are legal: a secure element, signed firmware images checked at boot, server-side verification against the production record, and revocation of credentials that do not appear in it. None of these prevents copying. Each raises the cost and leaves a trace.
Model weights embedded in a device are an asset with no realistic patent protection and a real per-unit extraction cost. Encryption and quantisation raise that cost without removing it, and a determined competitor with physical access will recover the weights. The commercial defence is that value sits in the service, the update channel and the data rather than in the binary; the legal defence is that the weights are a trade secret, which requires the measures described in the next section.
Open-source components require an inventory rather than an assurance. A firmware build contains a chipset vendor’s SDK, a real-time operating system, drivers and libraries, and some carry copyleft obligations that attach when the device is distributed. The obligation is to provide source for the covered components, not for the company’s own code, provided the components are linked in a way that keeps them separate. An ODM that assembled the stack from a reference design may not know which licences apply. A software bill of materials, requested at the start of the relationship, is cheaper than a compliance exercise after the first shipment.
Trade secrets across the factory floor
Chinese law protects a trade secret only where three conditions are met: the information is not publicly known, it has commercial value because it is secret, and the holder has taken measures corresponding to its confidentiality. The third condition is the one that fails, and it fails because it is operational rather than documentary. A signed NDA with the factory, on its own, is usually not enough to show that the company treated the information as secret.
Leakage happens in predictable places. The drawing package emailed to a sales engineer who forwards it to a friend at another factory. The tooling shop that receives the 3D files and keeps them after the mould is cut. The line supervisor who knows the process window that makes the yield acceptable. The quality engineer who holds the test limits. The costing spreadsheet that reveals the margin and therefore the price at which a competitor can undercut. Each is a person, not a document, which is why company-level agreements do not close the gap.
The measures that survive scrutiny in a Chinese dispute are specific. Individual confidentiality undertakings signed by each named recipient, in addition to the company NDA, because the undertaking gives the company a defendant who can be sued and who has something to lose. A defined schedule of confidential information attached to the agreement, so that the scope is not argued later. Access logs and a document management system that records who opened what. Physical controls in the areas where the process is visible. Exit interviews with a written acknowledgement of continuing obligations. A record of what was disclosed to whom, and when.
Compartmentalisation is the most effective measure and the one companies resist, because splitting the build across a PCB house, a module house and a final assembly plant costs margin and coordination. It also means that no single supplier can reconstruct the product. Where a single turnkey factory is unavoidable, the equivalent is to keep the critical sub-assembly in-house or with a supplier in another jurisdiction.
The NDA itself needs the terms that make it enforceable rather than merely signed. Governing law and a dispute resolution clause the company can actually use, whether a Chinese court or an arbitral institution in China, Hong Kong or Singapore. A liquidated damages figure that reflects the value of the information, since proving loss from a misappropriated design is otherwise close to impossible. A clause requiring return or destruction on termination. And a term of confidentiality that survives termination for as long as the information remains secret, rather than a fixed number of years that expires while the product is still selling.
Employee mobility inside the company’s own China team is a separate exposure. Non-compete obligations are available but limited in scope and duration and require compensation to be paid, and a badly drafted clause is unenforceable. Confidentiality obligations survive termination and can be indefinite for genuine secrets, which is why the classification of information matters at the point of hiring rather than at the point of departure.
Tooling, moulds and the ownership fight
Tooling is frequently the largest single prepayment in a hardware programme, and it is held by the party that cut the steel. If the company pays, the company should own, but ownership exists only if the contract says so and the chain of title reaches the tool shop, which is often a separate business from the assembler.
The ownership clause should attach on payment rather than on delivery, because delivery may never be documented. It should be supported by an asset register listing each tool by number, cavity count, steel grade and location, with photographs and a copy of the tool drawings. The agreement should give a right to inspect on notice, a right to remove the tool at any time on payment of any sums properly due, an obligation on the factory to maintain and insure it, a prohibition on modification without consent, and a prohibition on using it to make product for anyone else. On termination, the factory should be obliged to release the tool and the drawings and to confirm in writing that no duplicate has been made.
A mould in a factory is leverage, and the leverage runs the wrong way in a dispute. The remedy is not a better clause but a second source qualified before it is needed, or a tool design that can be moved. A mould built for one press may not run in another, and the practical answer is to specify a standard platen interface and to keep the tool drawings in the company’s own document system. Duplication is common and hard to detect directly. The detection route is the market: a competing product that carries the same parting line, the same ejector pin marks and the same tool number in the cavity.
The manufacturing agreement as an IP instrument
The manufacturing model determines the IP question. Under OEM the company supplies the design and should own all product IP, with the factory owning its general process know-how and licensing only what is needed to make the product. Under ODM the factory supplies the platform and sells it to several customers, and the company’s differentiation is the industrial design, the firmware and the brand; the agreement then has to secure assignment of the ID, ownership of the tooling, a period of exclusivity on the configuration, and a restriction on selling an identical configuration to a named list of competitors. Under JDM both sides contribute, and the allocation has to be written out because the default rules are not what a foreign party expects.
Joint ownership is the trap in JDM and in any co-development arrangement. Where a patent is co-owned, the default position allows each co-owner to exploit the patent independently, subject to accounting between them, which means the Chinese partner can license a competitor unless the agreement displaces the default. Copyright co-ownership raises similar questions about licensing and modification. The agreement must state who may do what, on what consent standard, and how proceeds are shared.
Four clauses carry most of the weight. A background and foreground definition, so that each party’s pre-existing technology stays with it and only new material is allocated. An assignment of foreground IP that deals expressly with moral rights, which cannot simply be waived under Chinese law. A restriction on use for competing products, drafted narrowly around a product definition and a customer list, because a broad restraint may not be enforced. And termination consequences: return of tooling and files, deletion of the company’s data from the factory’s systems, certification of destruction, and survival of confidentiality and of the licence-back.
Export, customs and enforcement
For a company that manufactures in China and sells abroad, the border is the most efficient control point. Recording patents, trademarks and copyright with China Customs allows customs officers to detain suspected infringing goods on export, and the copy has to leave the country to reach a buyer. Recordation requires the right to be registered in China, which returns the analysis to the first section: the recordation is only as good as the filing behind it. Companies routinely record the trademark and forget the patent, which leaves the appearance and the mechanism unprotected at the border even where the brand is protected.
Export control is a separate overlay. Certain accelerators and AI hardware are subject to Chinese export controls, and the same shipment may be subject to the destination country’s import controls. The two regimes are independent. The practical point for an IP strategy is that a factory’s unauthorised production run may be unlawful on export grounds as well as infringing, which gives a second line of action that does not depend on proving infringement.
| Channel | What it produces | Typical timing | When to use |
|---|---|---|---|
| Lawyer’s letter | A demand, sometimes compliance | Days to weeks | First contact, where the infringer has a reputation to protect |
| Administrative action (CNIPA, local market supervision) | Seizure, fines, an order to stop | Weeks to months | Clear cases, counterfeit goods, fast relief wanted |
| Civil litigation (specialised IP courts in Beijing, Shanghai, Guangzhou and Hainan, and tribunals elsewhere) | Injunction, damages, costs | Months to a year or more | Where damages matter or the infringement is technically contested |
| Criminal complaint | Investigation and prosecution | Months | Counterfeiting and large-scale piracy above the value thresholds |
| Customs | Detention and destruction at the border | On each shipment | Export-oriented copying |
| Platform takedown | Removal of listings | Days | Infringing product sold online |
Rights holders in Chinese courts succeed in a substantial majority of cases — around 70 to 80 per cent in many case types — which is a different picture from the one most foreign boards hold. The constraint is evidence. A notarised purchase, an expert comparison report and a clean chain of title decide more cases than the quality of the advocacy.
Documents, filings and timeline
| Step | Authority | Typical timing | What foreign companies miss |
|---|---|---|---|
| Freedom-to-operate search | CNIPA records and commercial databases | Two to four weeks | The factory’s own patents and the chipset vendor’s portfolio |
| Invention and utility model filing | CNIPA | Utility model six to twelve months; invention two to four years to grant | Filing after the drawing release |
| Design filing | CNIPA | Months | Publishing renders or showing the product first |
| Trademark filing | CNIPA | Nine to twelve months absent opposition | The Chinese-language mark, and the service classes |
| Software copyright registration | Copyright Protection Centre of China | One to two months | Skipping it because the code is treated as a secret |
| Layout design registration | CNIPA | Months | Only relevant where the company owns the layout |
| Customs recordation | China Customs | After grant or registration | Recording the brand but not the patent |
| Confidentiality undertakings | Internal | Before any disclosure | Company NDA with no named individual signatories |
| Tooling register and ownership clause | Internal | Before the tooling order | No chain of title to the tool shop |
| Manufacturing agreement | Internal | Before the pilot run | Joint ownership left to the default rules |
Where foreign companies get this wrong, and what it costs
The first failure is timing. A company that files after the factory has quoted, the product has been shown at a trade fair and the launch page has gone live has disclosed the design to the world and can no longer obtain a valid patent on it. The consequence is not a weaker patent but no patent, and the remaining protection is design and trade secret, both harder to enforce against a determined copier.
The second is territorial thinking. A home-country patent gives nothing in China, and a Chinese patent gives nothing in the markets where the copy is sold. The portfolio has to follow the manufacture and the sale.
The third is the single instrument. A patent on the mechanism, without a design registration, a registered mark and a trade secret programme, leaves the copier free to reproduce the appearance and the brand, which is how most copies are actually sold. The fourth is the NDA treated as a complete answer; the law asks what the holder did, not what the holder signed. The fifth is having no enforcement plan, because a portfolio never asserted is priced at zero by competitors.
Cost, in the context of a hardware programme, is modest. Trademark registration starts at a few hundred to about a thousand renminbi per class; a utility model application typically costs two to five thousand renminbi including attorney fees; a design application one to three thousand; an invention patent five to fifteen thousand and upwards depending on complexity and translation; software copyright a few hundred. These are filing and prosecution costs. Enforcement is an order of magnitude larger and should be budgeted as a contingency.
Practical checklist
- Complete a freedom-to-operate search before committing to the design, including the factory’s own portfolio.
- File the invention and the utility model on the same day, before any drawing leaves the building.
- File the design application before any render, photograph or sample is shown publicly.
- File the English mark, the logo and the Chinese-language mark, in the device, software and service classes.
- Register the firmware release with the Copyright Protection Centre of China.
- Obtain written assignments from every design studio, contractor and founder, covering copyright and design rights.
- Issue individual confidentiality undertakings to each named recipient at the factory, and keep the release log.
- Put tooling ownership on payment, register every tool, and photograph it in place.
- Negotiate the background and foreground IP split before the pilot run, and displace the default co-ownership rules.
- Record the patent, the design and the mark with China Customs once granted.
Where to go next
The work described here is front-loaded by design. Companies that complete it before the first factory visit spend less, argue less and retain the ability to move the supply chain. Companies that defer it discover the problem when a competitor’s product appears at a trade fair with the same housing and a different logo.
Geason Law Offices advises foreign AI and hardware companies on Chinese IP filing, manufacturing agreements and enforcement. The IP protection and trade secret practice pages set out how the firm works with technical teams, and the China hardware and supply chain guide covers the commercial context. For the contractual side, China manufacturing contracts: OEM, ODM and IP protection deals with the drafting in more detail, and Do I need a Chinese entity? explains when a local company becomes necessary to hold the registrations described above.
Related Articles
- China Manufacturing Cities Compared: Shenzhen vs Dongguan vs Suzhou vs Ningbo for Hardware Startups
- Shenzhen Hardware: From Prototype to Mass Production — A Startup Guide
- Injection Molding in China: A Complete Guide for Hardware Product Teams
- Export Controls for AI Hardware: What Foreign Companies Need to Know
Frequently Asked Questions↑ Back to article
What types of IP protection are available for hardware in China?
Hardware companies in China can use: invention patents (functional innovations), utility model patents (structural innovations, faster), design patents (product appearance), trademarks (brand and logos), copyrights (software/firmware and design docs), integrated circuit layout design protection, and trade secret protection. Most hardware products use a combination of several of these.
Should I file for patents in China before working with factories?
Yes — absolutely. Before you disclose your design to any Chinese factory or partner, you should have filed patent applications in China for your key innovations. If you disclose your design before filing, you may lose the ability to get a patent. Even if you have filed in your home country, you need Chinese filings — patents are territorial.
How do I protect my IP when manufacturing in China?
Key measures: (1) Register all IP before sharing with factories, (2) Use proper NDAs and manufacturing contracts with clear IP ownership clauses, (3) Mark confidential information and restrict access, (4) Carefully address tooling and mould ownership, (5) For ODM relationships, negotiate clear IP ownership terms before starting work, (6) Consider registering software copyright for firmware, (7) Have an enforcement strategy.
Are Chinese patents actually enforceable?
Yes. China has a strong and rapidly improving patent system. Patent enforcement has gotten much stronger in recent years, with specialised IP courts, higher damage awards, and more plaintiff-friendly procedures. The success rate for patent holders in Chinese courts is around 70-80% in many types of cases. The key is having well-drafted patents and a clear enforcement strategy.
How much does it cost to register IP in China?
Costs vary significantly: trademark registration starts around RMB 300-1,000 per class; invention patents typically cost RMB 5,000-15,000+ including attorney fees; utility model patents are cheaper at around RMB 2,000-5,000; design patents around RMB 1,000-3,000; software copyright registration is around RMB 300-800. Enforcement costs are separate and can be much higher.
What is the difference between invention patents and utility model patents in China?
Invention patents protect functional and technical innovations like new mechanisms, circuit designs, and manufacturing methods, with a 20-year protection period and substantive examination taking 2-4 years. Utility model patents protect structural and shape innovations of physical products, are easier and faster to obtain in 6-12 months because there is no substantive examination, and have a 10-year protection period. Utility models are very useful for hardware companies for quick structural protection, while invention patents provide stronger and longer-lasting protection for core technical innovations.
How do I enforce my IP rights against infringement in China?
China offers multiple enforcement channels for IP infringement. Administrative enforcement through local IP bureaus or market regulators is relatively fast and low cost, with the power to order cessation and fines. Civil litigation in specialised IP courts offers stronger remedies including damages and injunctions, with plaintiff success rates around 70-80% in many case types. Criminal complaint is available for serious infringement involving counterfeiting or large-scale piracy. The key to effective enforcement is having well-drafted patents, clear evidence of infringement, and a strategy that matches the channel to the situation — many companies use a combination of administrative action and civil litigation.