The question arrives in almost every first conversation with a foreign AI or hardware company: do we need a Chinese company? It is usually asked as a binary, and it is usually answered badly, because the person asking has merged three different questions into one. Whether you need a legal presence for tax purposes, whether you are permitted to do the activity at all without one, and whether you can operate commercially without one are separate tests with separate answers.
Companies get into difficulty by passing one test and assuming the other two. A team that sells into China through a distributor has solved the commercial question and often the tax question, and may still be selling a product that requires a licence, a certification or a filing that only a domestic entity can hold. A team that hires two engineers and calls them consultants has solved the commercial question and created a tax presence it has not declared. A team that sets up a company because a customer asked for a local invoice has taken on a permanent compliance cost to solve a problem a distributor could have solved.
The conclusion worth stating at the start is that a Chinese entity is required when one of three things is true and cannot be solved contractually: the activity needs a licence, certification or filing that attaches to a domestic entity; the company has a taxable presence in China that it cannot or should not avoid; or the commercial model requires local invoicing, local employment or local asset ownership. Everything else is a cost-benefit decision rather than a legal requirement, and the cost is higher than most companies expect because it is permanent.
Three questions hiding inside one
The first question is regulatory. Some activities may only be carried out by an entity established in China, or by an entity holding a licence that China does not issue to a foreign company. Internet information services, app distribution, AI services offered to the Chinese public, radio equipment, medical devices and a long list of sector-specific activities sit in this category. Where the activity is in the category, no amount of contractual structuring substitutes for an entity. The question is not whether an entity is convenient but whether the activity is lawful without one.
The second question is fiscal. A foreign company with a fixed place of business in China, or with a person who habitually concludes contracts on its behalf, may have a permanent establishment and a Chinese corporate income tax liability on the profits attributable to it. The test is about substance, not paperwork. A registered office is the clearest form of fixed place, but a home office used by a full-time employee, a laboratory used for joint development, or a warehouse used on an ongoing basis can serve the same function.
The third question is commercial. A foreign company cannot issue a Chinese tax invoice, cannot employ staff directly, cannot be the importer of record in its own name, and cannot hold certain certificates. Each of those is an operational constraint that a distributor, an agent or a service provider can absorb for a while, at a cost and with a loss of control.
The practical method is to answer the three questions separately, in that order. A company that starts with the commercial question and works backwards will usually end up with an entity it did not need, or without one it did.
The spectrum, and what each level can actually do
Presence in China is not a switch. It is a series of levels, each with a different legal character, a different cost and a different exposure.
| Level | What the company does in China | Entity | Main exposure |
|---|---|---|---|
| Pure cross-border trade | Buys from Chinese suppliers, sells to Chinese customers from abroad | None | Low, provided no local presence develops |
| Occasional visits and third-party QC | Factory visits, trade fairs, inspections by an independent firm | None | Low |
| Local agent or distributor | A third party represents the products, buys and resells, or introduces customers | None for the foreign company | Medium, depending on the agent’s independence |
| Resident people without an entity | Employees, contractors or consultants based in China | None, which is the problem | High, both tax and labour |
| Representative office | Liaison, market research, quality oversight | RO, not a separate legal person | Low if the activity stays within the permitted scope |
| WFOE | Full commercial operations, employment, invoicing | Yes | Compliant, with permanent compliance cost |
| Joint venture | Operations with a Chinese shareholder, sometimes required by the negative list | Yes | Compliant, with governance risk |
Most hardware companies begin at the first two levels and stay there for years. The movement between levels is usually driven by one event: a customer who needs a local invoice, a licence application that requires a domestic applicant, or a hire that cannot be structured as a contractor any longer.
What can be done with no entity at all is broader than most companies assume. Buying from Chinese factories on purchase orders, paying by international transfer, importing into the home market, appointing an independent inspection company, attending trade fairs, negotiating and signing contracts as a foreign company, licensing technology to a Chinese partner, and running OEM, ODM or joint development relationships are all possible without a Chinese entity. Cross-border e-commerce adds a route to Chinese consumers without a local company, although the platforms impose their own requirements and the tax treatment of the sales depends on the structure.
The line is crossed by sustained local presence rather than by any single transaction. One visit is not presence. A person who lives in Shenzhen and works for the company full time is presence, whether or not there is an office, a contract or a payroll.
Permanent establishment: the tax line
Permanent establishment is a concept from double taxation treaties, and it determines when a foreign enterprise has a taxable presence in China. The two limbs that matter in practice are the fixed place of business and the dependent agent.
The fixed place limb covers an office, a branch, a factory, a workshop, a place of management, and equipment or facilities used on an ongoing basis. The treaty language is usually broad, and the exceptions — storage, display, purchasing, and certain auxiliary activities — are narrower than companies expect. A showroom that also takes orders is not a storage facility. A laboratory used to test products for the Chinese market is not obviously auxiliary.
The dependent agent limb covers a person who habitually concludes contracts on behalf of the foreign enterprise, or who plays the principal role leading to the conclusion of contracts that the enterprise routinely concludes. The person can be an employee, a contractor or an agent. The test is about what the person does, not what the contract calls them. A “consultant” who negotiates prices, agrees delivery dates and signs order confirmations is a dependent agent whatever the invoice says.
The consequence of a PE is not merely a registration. Profits attributable to the PE are subject to Chinese corporate income tax, and the absence of registration and filing produces assessments, penalties and interest going back over the period of the presence. The attribution exercise is itself contested, because it requires an allocation of group profit to functions performed in China.
Four scenarios recur in AI and hardware companies, and they sit at different points on the scale. Occasional factory visits with an independent inspection firm are low risk. A single engineer living in China and working remotely for the foreign parent is high risk, because the fixed place is his home and the work is full time. A “country manager” engaged as a consultant who signs contracts is high risk as a dependent agent. A leased office in Shenzhen is very high risk, because it is the classic fixed place. A representative office used strictly for liaison is low risk, because it is registered and its activity is limited.
The most common error is the belief that no office means no PE. Chinese tax authorities now have access to visa records, cross-border payment data, social insurance records and company registration data, and the practical risk of detection has risen accordingly. The second most common error is assuming that a Hong Kong or Singapore company solves the problem. It changes the treaty and the withholding position, and it may change the reporting, but a person in Shenzhen doing the same job creates the same substance question.
The licensing triggers: where only a Chinese entity will do
This is the part of the analysis that companies most often miss, because it is sector-specific and it does not appear in the tax discussion.
Internet content and applications served from within China require an ICP filing, and a filing is made by the operating entity in respect of a website or app hosted on a domestic server. A commercial internet information service requires an ICP licence rather than a filing, and foreign investment in value-added telecommunications is restricted under the negative list, subject to pilot openings in specific regions that require local advice before they are relied on. The practical consequence is that a foreign company selling a connected service to Chinese users has, at some point, to decide who holds the filing or the licence. It is usually a domestic entity in the group.
Apps face a parallel regime. App filing is tied to the entity that holds the corresponding filing or licence, and a foreign company without a Chinese entity has no one to file.
AI services add a second layer. Algorithm filing and the registration of generative AI services are made by the provider of the service, and in practice the provider is an entity established in China. A foreign company that offers an AI service to users in China from outside the country faces the threshold question of whether it is providing the service within China at all; where the answer is yes, the filing obligation has to be located in a domestic entity, and where the answer is no, the commercial model has to be built so that the position is defensible. Both routes need advice before launch rather than after.
Product regulation adds a third layer that hardware companies meet early. Radio transmission equipment requires type approval, and the applicant is normally a domestic entity or its authorised representative; the certificate is issued to the applicant. Products in regulated categories require certification, registration or a licence held by a domestic applicant. The trap is structural rather than legal: if the distributor is the applicant, the distributor holds the certificate, and the brand owner cannot move to another distributor without re-applying. The certificate becomes a lock-in that the distribution agreement does not mention.
Import and export add a fourth. A company that wants to import in its own name, hold the goods on its own balance sheet and receive a deductible VAT invoice needs to be registered as a foreign trade operator, which requires a Chinese entity. A foreign company can sell into China, but it does so through an importer, and the importer is either the distributor or a service provider.
Employment adds a fifth. Only a registered entity can employ staff directly and issue employment contracts. Staffing agencies can supply people during a setup period, and independent contractors can be engaged for defined work, but a team that is functionally the company’s China operation and is employed by a third party carries misclassification and PE risk that grows with time.
Invoicing is the commercial counterpart of all of this. A Chinese customer that buys from a foreign company receives a commercial invoice and, depending on the transaction, may be unable to deduct input VAT. For many customers that is a reason to buy from someone else, which makes local invoicing a commercial necessity even where it is not a legal one.
What a distributor can absorb, and what it cannot
A distributor is the cheapest way to test a market and the most common first structure. A true distributor buys the goods, takes title, bears credit risk, holds the import registration, issues the tax invoice and sells to its own customers. For the foreign company that solves the commercial question and most of the PE question, because an independent distributor is not a dependent agent.
Independence is the test, and it is factual. A distributor that represents several brands, holds inventory at its own risk, sets its own resale prices and decides whom to sell to is independent. An agent that represents only the foreign company, sells at prices the foreign company sets, and refers every contract for approval is a dependent agent in substance, whatever the agreement says. The difference determines whether the structure reduces PE risk or creates it.
What a distributor cannot absorb is the list of things that attach to the brand owner rather than to the seller. Trademark registration is the first: the brand has to be registered in China by the brand owner, and a distributor who registers it, whether through error or design, holds a right that can be used against the brand owner later. Product certification is the second, for the reason described above. Data obligations are the third: where the product connects to a service that processes personal information of Chinese users, the obligations attach to the processor, and a distributor that merely resells the hardware does not take them on.
The fourth is the customer relationship, which is a commercial loss rather than a legal one but is usually the largest. A distributor owns the customer data, the service relationship and the renewal, and a brand that decides to sell directly later finds that it has to rebuild all three.
Distribution agreements also need terms that foreign companies rarely draft. Exclusivity should be tied to performance, with a minimum purchase commitment and a right to convert to non-exclusive on failure. Resale price maintenance is treated as a vertical monopoly agreement risk under Chinese competition law and must be structured as a recommended price rather than a fixed one, with advice on the current enforcement position. Termination should deal with inventory, with outstanding warranty obligations and with the transition of certifications, because a long-standing distribution relationship that ends abruptly can generate claims that the agreement did not anticipate.
The entity options compared
| Feature | Representative office | WFOE | Joint venture |
|---|---|---|---|
| Separate legal person | No, an extension of the foreign company | Yes | Yes |
| Can generate revenue | No | Yes | Yes |
| Can sign commercial contracts | No | Yes | Yes |
| Can employ directly | No, staff are supplied through an agency | Yes | Yes |
| Can issue Chinese tax invoices | No | Yes | Yes |
| Tax basis | Deemed profit | Actual profit, with preferential rates available | Actual profit |
| Typical setup | A few weeks | Two to four months | Longer, with negotiation and approval |
| Registered capital | Not applicable | Required, amount set by the parties | Required, shared with the Chinese shareholder |
| Running cost | Lower | Accounting, tax filing, address, payroll | As for a WFOE, plus governance |
| Transition to a larger presence | Must be closed and replaced | Can expand | Can expand, subject to the shareholder relationship |
The representative office is the option that looks cheaper and usually is, for a defined period. It gives a registered presence, an address, a bank account and the ability to have staff in China through a service agency, and it keeps the activity within a scope that does not create a PE problem. Its limits are severe: no revenue, no contracts, no direct employment, and no ability to convert into a WFOE. A company that outgrows an RO closes it and starts again.
The WFOE is the standard structure for a foreign company that intends to trade, employ and invoice. It is a Chinese limited liability company wholly owned by the foreign investor, with a registered capital, a registered address, a legal representative and a business scope. The business scope matters more than companies expect: it defines the activities the entity may carry out, some activities require a permit before the scope can be used, and an activity outside the scope creates a compliance problem that surfaces at the bank or at the tax bureau rather than at the registration counter.
The joint venture is required only where the negative list restricts foreign ownership, and is chosen voluntarily where a Chinese partner brings a licence, a customer base or a manufacturing asset that cannot be acquired otherwise. The governance questions — board composition, deadlock, reserved matters, transfer rights, exit — determine whether the JV survives its first disagreement, and they are cheaper to negotiate before the entity exists than after.
A decision framework
The framework below is deliberately sequential. Each question can end the analysis, and the order matters because a regulatory requirement is not negotiable while a commercial preference is.
| Question | If the answer is yes | If the answer is no |
|---|---|---|
| Does the activity require a licence, certification, filing or registration that only a domestic entity can hold? | Entity required, and the entity type follows the licence | Continue |
| Will the company have a fixed place or a person habitually concluding contracts in China? | PE exposure; either establish an entity or restructure the presence | Continue |
| Does the commercial model require Chinese tax invoices, local employment or local asset ownership? | Entity required for practical purposes | Continue |
| Is the China volume sufficient to carry the running cost of an entity? | WFOE, sized to the activity | Distributor, agent or cross-border |
| Is foreign ownership restricted in the sector? | Joint venture or a licensed partner | WFOE |
Two tests sit outside the table and should be applied to every answer. The first is timing: an entity takes two to four months for a standard trading or consulting WFOE, longer for manufacturing or a regulated activity, and the clock only starts when the documents are complete. A company that needs to invoice in March has to start in the previous year. The second is reversibility: an RO cannot become a WFOE, a distributor relationship is difficult to unwind without cost, and a WFOE is expensive to close. The structure should be chosen for the position the company expects in eighteen months, not for the position it is in today.
Cost: running one, and skipping one
The cost of a WFOE is not the incorporation fee. It is the annual cost of being a Chinese company: bookkeeping, tax filing, statutory audit where required, a registered address, payroll and social insurance for any staff, and the management time to supervise all of it. Companies commonly budget somewhere in the range of RMB 30,000 to 80,000 a year for the basic compliance of a small entity, before payroll. Registered capital is a separate question: there is no statutory minimum for most activities, but the figure represents the shareholders’ liability limit and affects how banks, customers and regulators see the company. For a typical AI or technology WFOE, RMB 1 million to 5 million is a common range, and the right figure depends on the business plan.
The tax side can improve the economics. Corporate income tax is 25 per cent at the standard rate, and 15 per cent for an enterprise that qualifies as a high-tech enterprise, which requires research and development expenditure, owned intellectual property and a sufficient proportion of revenue from high-tech products or services. The certification takes preparation and is not automatic. Other incentives exist for research and development spending and for software enterprises, and they change, so the position should be confirmed at the time of application rather than assumed from an earlier year.
The cost of skipping an entity is harder to quantify and usually larger. Back taxes on attributed profits, penalties and interest, a labour claim from a person treated as a contractor but working as an employee, a product held at customs because the certification is in the wrong name, or a platform that will not list an app because the filing entity does not exist. Each is a discrete event with a discrete cost, and the aggregate is usually several years of the compliance budget the company was trying to avoid.
Where companies get this wrong
The first error is the office test. Companies conclude that because they have no office they have no presence, and then place a full-time employee in an apartment in Shenzhen. The fixed place is wherever the work is done, and the tax authority’s first question is where the person sits, not whether there is a lease.
The second is the consultant who is the country manager. A senior person engaged on a services invoice, who negotiates with customers and signs order confirmations, is the textbook dependent agent. The structure saves payroll tax and creates a PE.
The third is the representative office that sells. An RO that quotes prices, takes orders or invoices through a sister company has left its permitted scope, and the registration that was supposed to reduce risk becomes evidence of the activity it was not allowed to conduct.
The fourth is the distributor who holds the certificates. The brand owner discovers at the point of termination that the type approval, the registration or the product listing belongs to the distributor, and that moving to a new partner means starting the application again.
The fifth is the WFOE with the wrong business scope. The entity is established for “consulting” and then starts selling hardware, or is established for trading and then provides a service that requires a licence. The bank queries the payments, the tax bureau queries the invoices, and the fix is an amendment that takes longer than the original setup.
The sixth is setting up too early. An entity established to satisfy a customer’s request for a local invoice, before there is enough revenue to carry it, becomes a fixed cost that the China business has to fund from the group. The distributor route would have served for another year.
Documents, filings and timeline
| Step | Authority | Typical timing | What foreign companies miss |
|---|---|---|---|
| Decide the activity and the licence route | Internal, with local advice | Before any filing | Assuming the activity needs no licence |
| Name pre-approval | Market regulation administration | One to two weeks | A name that conflicts with an existing mark |
| Prepare and notarise incorporation documents | Notary and consulate in the home jurisdiction | Two to four weeks, often longer | Documents signed in the wrong form and returned |
| Business licence | Market regulation administration | Five to fifteen business days | A business scope that does not cover the actual activity |
| Seal carving and filing | Public security and bank | One to three days | Seals held by one person with no controls |
| Tax registration and invoicing setup | Tax bureau | One to two weeks | No finance staff able to operate the invoicing system |
| Bank account opening | Commercial bank | Two to four weeks | The delay between licence and the ability to receive money |
| Foreign exchange registration | Bank, on behalf of the regulator | With the bank account | Capital contribution not registered, so later remittances are blocked |
| Sector licence or filing, where required | The relevant regulator | Variable, often months | Discovering the requirement after the entity is set up |
| Representative office establishment | Market regulation administration | A few weeks | Assuming it can be converted into a WFOE later |
Practical checklist
- Answer the regulatory question first: identify every licence, certification and filing the activity requires, and who must hold it.
- Map where every person working for the company in China actually sits, and on what contract.
- Test each China-based agent or consultant against the dependent agent description rather than the label.
- Decide whether the distributor is genuinely independent, and document the evidence.
- Register the trademark in China in the brand owner’s own name before any distributor is appointed.
- Identify which certificates the distributor would hold, and negotiate the transition terms now.
- Choose the structure for the position expected in eighteen months, not today.
- Size the business scope to the activity, and check the pre-approval requirements for each item.
- Budget the annual compliance cost, not the incorporation fee.
- Check whether the activity qualifies for high-tech enterprise treatment before assuming the standard tax rate.
Where to go next
The entity question is usually decided in a fortnight and paid for over several years. A company that separates the regulatory, fiscal and commercial tests, and answers them in that order, tends to arrive at a structure it can live with. A company that starts from the price of incorporation tends to arrive at one it has to unwind.
Geason Law Offices advises foreign AI and technology companies on China entry structures, permanent establishment exposure and the licensing routes that determine whether an entity is optional or mandatory. The incorporation practice page sets out the entity work, and the WFOE setup guide covers the incorporation process in detail. Where the activity involves an internet service or an AI product, ICP filing, ICP licence and EDI licence and algorithm filing explain the filings that most often force the decision. Companies weighing an entity against a supply relationship should read the China entry roadmap and the China hardware and supply chain guide alongside this guide.
Related Articles
- WFOE Setup in China: A Complete Guide for Foreign AI & Tech Companies (2026)
- Trading WFOE in China: Setup, Costs and Compliance for Import/Export Companies
- Quality Control in China: A Guide for Foreign Hardware Companies
- Cross-Border Tech Cooperation: Joint Development Agreements in China
Frequently Asked Questions↑ Back to article
Can I manufacture in China without setting up a company?
Yes. Many foreign companies manufacture in China through cross-border purchase orders without a local entity. You place orders with factories, pay them, and they ship the goods to you. However, the line crosses when you have people on the ground, ongoing local operations, direct sales in China, or activities that create a permanent establishment.
What is permanent establishment (PE) risk?
Permanent establishment is a tax concept: if your company has a sufficient presence in China (a fixed place of business, or a person who habitually concludes contracts on your behalf), Chinese tax authorities may treat you as having a taxable presence in China. This means you could be liable for Chinese corporate income tax on profits attributable to your China activities, plus penalties for non-compliance.
What is the difference between a representative office and a WFOE?
A representative office (RO) is a limited form of presence that can only do non-profit-generating activities like market research, liaison, and quality control — it cannot sign contracts or generate revenue. A Wholly Foreign-Owned Enterprise (WFOE) is a full Chinese company that can do business, hire employees, sign contracts, and generate revenue. ROs are simpler to set up but very limited in what they can do.
When should I set up a Chinese entity?
You should set up a Chinese entity when: (1) you need to hire local employees directly, (2) you need to sign contracts in China or provide services from China, (3) you have ongoing local operations that create PE risk, (4) you need local billing and invoicing, (5) you want to sell directly to Chinese customers, or (6) you need Chinese licences or permits to operate. Many companies wait too long and operate in a grey zone — setting up proactively is usually cheaper and cleaner.
What is a WFOE and how long does it take to set up?
A WFOE (Wholly Foreign-Owned Enterprise) is a company entirely owned by foreign investors, the most common structure for foreign companies in China. Setup typically takes 2-4 months for a standard consulting or trading WFOE, and longer for manufacturing or regulated sectors. Requirements include registered capital, a registered address, and a legal representative.
What activities can I do in China without setting up a legal entity?
You do not need a Chinese entity for buying from Chinese suppliers through purchase orders, remote sales to Chinese customers via cross-border e-commerce, occasional factory visits and trade show attendance, short-term technical support trips, negotiating and signing contracts as a foreign company, R&D cooperation agreements, technology licensing, and OEM/ODM manufacturing relationships. The line crosses when you have a sustained on-the-ground presence with employees, a fixed office, or ongoing local operations that create permanent establishment risk.
What are the different engagement models between cross-border and full entity?
There is a spectrum of engagement models from pure cross-border trade with no entity needed and low PE risk, through factory visits and quality control, working with local agents or distributors, having resident employees or contractors which carries high PE risk, setting up a Representative Office for official non-profit liaison activities, to a full WFOE or joint venture for complete business operations. Most foreign companies start at the lower levels and gradually move up as their China presence grows.