The container arrives, the first units are unpacked, and the defect rate is not what the sample suggested. At that moment three clocks start at once: the contractual inspection period, the practical window in which the supplier is still motivated to fix the problem, and the period during which the evidence is still intact.

Most claims are lost on the second and third clocks rather than the first. Buyers who would win on the merits lose because the goods were returned, reworked, scrapped or resold before anyone photographed them, or because notice arrived three months late and the contract treated silence as acceptance.

The claim is a documentary exercise. A Chinese court or tribunal will decide three questions — whether the goods conformed to an agreed standard, whether the buyer preserved its rights in time, and what the failure actually cost — and each of them is answered by records created before the dispute began. What follows covers what “defective” has to mean in the contract, what to do in the first days, how notice must be given, how loss is quantified and proved, how money is recovered before judgment through set-off and retention, and how the court and arbitration routes differ in practice.

What “defective” has to mean before the goods arrive

Chinese sales law does not impose an abstract standard of quality. Under the Civil Code, goods must conform to the quality requirements agreed by the parties. Where those requirements are unclear, the gap is filled in sequence: by supplementary agreement, then by trade usage, then by national or industry standards, and finally by a standard of fitness for the purpose the buyer made known to the seller.

That hierarchy explains why two buyers holding the same defective batch get different outcomes. The buyer whose contract annexes a specification, a sampling plan and an acceptance method has a measurable claim. The buyer whose contract says “first-class quality, suitable for export” has an argument about what those words mean, and arguments are expensive.

The standard is contractual rather than regulatory. Product Quality Law and the GB standards set a floor, chiefly for safety and for products sold into the Chinese market, but a claim for a substandard batch is almost always a contract claim. A buyer that pleads only that the goods were defective, without identifying the clause or the figure the goods failed to meet, is asking the tribunal to supply a standard it does not have.

It also helps to be precise about which kind of defect is alleged, because each has a different defendant and a different defence.

A contract that does not allocate these three risks leaves the supplier free to characterise every failure as the first and every loss as the buyer’s.

Three drafting points do most of the work.

One trap deserves separate mention. An AQL level is not a warranty that every unit conforms. Agreeing an acceptance quality limit of 1.0 per cent means the supplier warrants a process, not a batch, and a buyer that inspects to a tighter standard than the contract allows will lose the argument about the units that fall between the two. The acceptance standard and the inspection standard must be the same number, expressed the same way, in the same document.

Version control matters as much as content. A specification that exists in four revisions across email, a drawing file and a purchase order annex is a specification the supplier can dispute line by line. Date every revision, require written approval for engineering changes, and state that a change is not effective until both parties have signed the change note and agreed the price and timing consequence. The same discipline applies to first-article approval: approving a sample confirms that the sample met the specification, and it should be stated expressly that approval does not vary the specification or waive a defect that appears in production.

The first seventy-two hours

The instinct is to call the supplier and demand a replacement. That is usually the wrong first move, because a phone call creates no record and a replacement shipment destroys the evidence.

The sequence that preserves the claim is unglamorous.

  1. Stop. Quarantine the affected batch. Do not rework, scrap, resell or return it without a written agreement. Segregate it physically, label it, count it, record where it is stored, and keep it away from conforming stock so that a later inspection cannot be met with the suggestion that the samples came from somewhere else. Keep the packaging, the pallets and the container seals; the carton markings are often the only link between the goods and a particular production run.
  2. Document. Photograph and video the unopened packaging, the labels, the batch numbers and the failure. Record the inspection conditions, the instruments used and the personnel present. Put a scale in the frame, capture the date codes and the seal numbers, and film the opening of at least one carton in a single continuous take. A photograph of a broken part proves very little; a video from sealed carton to failed unit proves the chain.
  3. Sample. Retain a statistically meaningful sample, sealed and signed, and store it under conditions that will survive scrutiny. If the failure is environmental, keep the failed units as they are. Take control samples from the conforming part of the same lot as well, because the supplier’s first answer will be that the failure is isolated and the buyer’s best answer is a measured failure rate across the lot.
  4. Notify in writing. A notice that identifies the batch, the order, the specification breached, the observed failure rate and the remedy requested. Send it within the contractual period, by a method that proves delivery. The detail of what the notice should contain is set out below, because this is where most claims fail.
  5. Preserve the record. Production records, incoming inspection reports, machine logs, downtime records and correspondence. If the defect caused a line stop, the production data is the damages evidence. If the goods were sorted by hand, the sorting sheets are the cost evidence.

Two practical constraints shape the sequence. The first is that goods which are perishable, hazardous or occupying scarce warehouse space cannot always be held indefinitely. Where disposal is unavoidable, photograph and count before disposal, invite the supplier to attend, and obtain its written acknowledgement that the goods may be destroyed. Destruction without that record converts a strong claim into an argument about whether the goods were ever defective.

The second is that the commercial team will want to keep the relationship calm. That instinct is usually right on tone and usually wrong on timing. A firm written notice sent in week one is easier to live with than a claim raised in month four, and a supplier that receives a professional notice early is more likely to send an engineer than a lawyer.

Notice mechanics

Notice is the step most often mishandled, and the failure is rarely one of substance. Buyers send the right complaint to the wrong address, in the wrong language, at the right time, and lose the point on a technicality that the contract expressly created.

A contract that provides for inspection within fourteen days and deemed acceptance afterwards will be enforced. If the defect is latent — a failure mode that only appears in the field after weeks of operation — the buyer has to show that it could not reasonably have been discovered on inspection, and that notice followed promptly after discovery.

ElementWhy it mattersWhat the notice should say
RecipientNotice to a salesperson may not bind the companyThe contracting entity, at the address or email named in the contract, copied to the legal representative and the account manager
MethodThe contract may prescribe oneFollow the prescribed method, and duplicate it by courier with proof of delivery
IdentificationThe supplier will dispute which goods are in issueOrder number, purchase order, model, lot or batch code, date code, quantity affected, container or shipment reference
Standard breachedA complaint without a standard is an opinionThe specification clause, drawing revision, test method and the measured result against the required value
Failure rateIsolated failures are treated as handling damageUnits inspected, units failed, rate, and the sampling basis
Remedy demandedSilence lets the supplier choose the remedyRepair, replacement, price reduction, termination or damages, stated as the primary claim with alternatives reserved
Response deadlineCreates a record of non-cooperationA date by which the supplier must respond and attend a joint inspection
ReservationA narrow notice can be read as a full settlementAn express reservation of rights, including losses not yet quantified
LanguageA bilingual contract may give one version priorityThe language of the prevailing version, with a courtesy translation of the other

Four errors recur.

The first is a notice that rejects the goods. “We reject the batch and require you to collect it” is a termination notice in most contracts, and a buyer that has not yet decided to terminate has just made the decision for itself, usually before it has measured the failure rate. Say instead that the goods are held pending inspection and that the buyer reserves its rights.

The second is a notice that waits for the investigation to finish. A holding notice with a preliminary description, a stated failure rate and a reservation of the right to supplement preserves the claim. A complete notice sent after the inspection period has expired does not, because the clause bars the claim rather than the description.

The third is acceptance by conduct. Signing a delivery note, an inspection certificate or a “no claim” line on a credit note can be treated as confirmation that the goods conformed. Where a certificate must be signed to get the goods released from a warehouse, sign it subject to a written reservation delivered the same day.

The fourth is a settlement that closes the file too early. A credit note accepted as full and final settlement ends the claim for the batch and, if it is drafted widely, for the contract. Accepting a credit note against future orders is not the same as accepting payment, and the difference should be recorded.

Where the buyer cannot inspect within the period, the answer is to extend the period in writing before it expires, not to inspect late and argue about it afterwards. Suppliers agree to extensions routinely when the request is made in time and the reason is operational.

Evidence that survives scrutiny

Chinese courts and tribunals are document-driven. The party that produces contemporaneous records usually wins the factual question, and technical questions are usually decided by appraisal.

EvidenceWhat it provesWeakness
Contract, specification and purchase orderThe standard the goods had to meetConflicts between documents
Incoming inspection reportThe defect existed at deliveryChallenge to method and timing
Retention samplesPhysical condition of the batchChain of custody
Third-party laboratory reportObjective test resultSampling method disputed
Production and downtime recordsThe loss causedCausation to the defect
Correspondence and noticesNotice and opportunity to cureLate or informal notice
Supplier’s own quality recordsWhat the supplier knewAccess requires cooperation or disclosure
Freight, customs and warehouse documentsWhen the goods arrived and how they were handledDoes not address condition on arrival
Customer debit notes and chargebacksThe downstream loss actually sufferedWhether the charge was justified

Chain of custody is the weakness that defeats otherwise good technical evidence. A sample that sat in an open warehouse for six weeks, handled by three people, is a sample the supplier will say was damaged after delivery. The fix is administrative: a seal with a unique number, a photograph of the seal at each transfer, a signed log naming each custodian and the storage location, and a rule that no one opens the sample without a witness. None of this is legal work, and all of it decides cases.

Sampling deserves the same discipline. Use a sampling standard both parties recognise, state the lot size and the inspection level, and record the accept and reject numbers. A laboratory report on three units drawn from a lot of twenty thousand is a data point, not a failure rate, and the supplier will say so.

An inspection conducted by a laboratory the supplier has not agreed to will be attacked. Where the amount is significant, propose a joint inspection in writing, offer two dates, and record the refusal if none is accepted. A documented refusal is worth more than a second unilateral test, because it removes the supplier’s complaint that it never had the chance to observe the method.

Expert appraisal is the normal way technical disputes are resolved in Chinese proceedings. The court or tribunal confirms an appraisal institution, usually from a published list, and the parties may propose candidates and comment on the scope of the questions. The appraisal fee is normally advanced by the party applying for it and allocated in the final award or judgment. Two consequences follow. The questions put to the appraiser matter more than the advocacy at the hearing, because the appraiser answers the questions it is given. And a party that loses the appraisal usually loses the case, so the technical file — drawings, process parameters, test data, maintenance records — should be assembled before the dispute rather than in response to it.

Electronic evidence is admitted but challenged. Email is the safest channel because headers carry the metadata; WeChat is admissible but authenticity is contested and the original device may be required. Export correspondence in a form that preserves headers, keep the devices, and where a critical exchange exists only in a chat application, consider notarised capture of the record. Notarisation of electronic content is a routine service in China and is cheap relative to the value of most quality disputes.

Remedies under Chinese law

The Civil Code gives the buyer a menu, and the choice has consequences. The remedies are not cumulative in the way buyers assume, and the order in which they are claimed affects both the evidence required and the tribunal’s willingness to grant them.

RemedyWhen it is availableWhat it recoversPractical constraint
Repair, replacement or reworkAny non-conformity, including minor defectsConforming goods, or the cost of making them conformingSlow, and a supplier in financial difficulty may never perform
Price reductionGoods usable but worth less than the priceThe difference between value as delivered and value as warrantedRequires evidence of value, usually market price or repair cost
DamagesAny breach, including non-conforming deliveryLoss caused, including lost profits where foreseeableSubject to causation, mitigation and foreseeability
Termination and refundBreach that defeats the essential purpose, or failure to cure after noticeRestoration of the pre-contract positionUnavailable where the goods have been consumed, resold or substantially altered
Liquidated damagesWhere the contract provides a formulaThe stipulated sum, subject to adjustmentA court or tribunal may reduce an excessive figure

Repair, replacement or rework is the default remedy for non-conforming goods. It is cheap and preserves the relationship, but it is slow, and a supplier in financial difficulty may never perform it. Where the buyer accepts rework, it should fix the method, the place, the deadline and the acceptance test, and should state that the cost of rework, including freight both ways and the cost of any temporary cover, sits with the supplier.

Price reduction is a proportionate reduction reflecting the difference in value. It is useful where the goods are usable but substandard, and often the fastest route to a commercial settlement, because it can be agreed without returning anything. The arithmetic needs a value benchmark: the price the buyer could have obtained for conforming goods, the cost of bringing the goods up to standard, or the market price for an equivalent grade.

Damages compensate for losses caused by the breach, including lost profits where foreseeable. The buyer must mitigate; losses that could have been avoided by reasonable steps are not recoverable. Damages are compensatory, not punitive, and the tribunal will look for a causal chain rather than a total.

Termination and refund is available where the breach deprives the buyer of the essential purpose of the contract — a defect rate that makes the goods unusable, or a failure to cure within a reasonable period after notice. Termination returns the parties to their pre-contract position, and the buyer must account for what it received. In practice, a buyer that terminates without first giving the supplier a defined opportunity to cure often finds the termination set aside, and is left with a damages claim it could have had anyway.

Liquidated damages are enforceable, but adjustable. A court or tribunal may reduce an amount that is excessively higher than the actual loss, and the reference point in practice is thirty per cent. A penalty linked to delay, replacement cost or line downtime is easier to defend than a round-number penalty with no arithmetic behind it. Delay liquidated damages and quality liquidated damages should be separate, with separate caps, so that a slow delivery and a bad delivery do not compete for the same ceiling.

Quantifying the loss

A defect claim that is not quantified is a complaint. The buyer should build the loss schedule as the loss occurs, not after the dispute begins, because the documents that prove each line are produced at the time and are difficult to reconstruct later.

Head of lossWhat it coversProof
Price paidThe invoice value of the non-conforming goodsInvoice, payment record, contract
Cost of coverReplacement goods bought at a higher price, expedited freight, duty and clearanceReplacement invoice, freight invoice, customs declaration
Sorting and inspection100 per cent inspection of the delivered lot, labour and third-party inspection feesSorting sheets, inspector invoices, timesheets
Rework and scrapLabour, materials, consumables, scrap value lostWork orders, scrap tickets, material invoices
Line downtimeIdle labour, unrecovered fixed overhead, overtime to recover the scheduleProduction records, machine logs, payroll and overtime records
Downstream liabilityCustomer chargebacks, penalties, replacement or refund obligations actually incurredCustomer debit notes, contracts with the buyer’s own customer
Recall and logisticsRetrieval, storage, destruction, customer communicationLogistics invoices, recall records
Financing costThe cost of capital tied up in unusable stock and in replacement purchasesFacility agreements, interest statements
Investigation costTesting, appraisal, translation and technical consultancyInvoices and the appraisal fee award

Three principles decide how much of that schedule survives.

Causation. The loss must flow from the defect rather than from the buyer’s own planning. A line that was already two weeks behind schedule cannot attribute the whole of its stoppage to a defective batch, and a tribunal will apportion. The strongest causation evidence is a before-and-after comparison of output and a record showing that the affected batch was the binding constraint.

Mitigation. Losses that a reasonable buyer could have avoided are not recoverable, and the buyer’s mitigation decisions should be documented at the time. A decision to buy replacement components at a premium, taken on a dated internal note with two quotations, is defensible. The same decision taken without a record looks like an opportunity to recover an inflated cost.

Foreseeability. Consequential loss is recoverable where it was foreseeable at the time of contracting, and foreseeability is established by what the buyer made known to the seller. A purchase order for components that says nothing about their use supports a claim for the value of the components. The same order that states that the components feed a production line with a daily output of two thousand units, and that a stoppage costs a stated amount per day, supports a claim for the stoppage.

Management time, internal legal cost and reputational harm are rarely recoverable and should not be presented as if they were. A schedule that includes them invites the supplier to attack the whole document, and a schedule that is tight on eight lines is worth more than a schedule that is loose on twelve.

Two contractual limits need to be read before the schedule is built. Many Chinese suppliers’ standard terms cap liability at the invoice value of the defective batch, which for a component costing a few renminbi per unit is a cap that bears no relation to the loss. Others exclude consequential loss entirely. A negotiated contract should remove the cap for quality, IP and confidentiality breaches, raise it for everything else, and carve out the buyer’s downstream commitments from any exclusion of consequential loss. Where the cap survives negotiation, it should at least be expressed as a multiple of the annual contract value rather than of a single shipment.

Set-off, retention and security

The fastest recovery in most quality disputes is not a judgment. It is money the buyer already holds or already owes.

Contractual set-off. A well-drafted clause allows the buyer to set off any liability of the supplier — including a disputed quality claim — against any invoice or other sum payable, across contracts if the clause says so. The clause should state that exercise of the right is not a breach, does not entitle the supplier to suspend production, and does not affect the buyer’s other remedies. Without that last sentence, a set-off against one invoice can be met with a suspension of the next shipment, which converts a cash-flow advantage into a supply interruption.

Statutory set-off. Where the contract is silent, Chinese law permits set-off between mutual debts that are due and of the same kind, on notice to the other party. The conditions are narrow. A debt that is not yet due cannot be set off, a disputed debt may be resisted, and a set-off against a sum owed under a different contract with a different dispute-resolution clause can be challenged on jurisdiction grounds.

Retention. Holding back a percentage of each invoice until the warranty period expires is common and effective, provided the contract says so and defines the release conditions. Retention that is not in the contract is a payment delay, and a payment delay is a breach that can justify the supplier suspending production or terminating.

Security. Where the supplier’s balance sheet is thin, the useful instruments are a parent company guarantee, a bank guarantee or standby letter of credit, a cash deposit, or title retention over the tooling. A guarantee from a Chinese parent is only as good as the parent’s assets and the formalities behind it: the guarantee should be supported by the corporate authorisation the parent’s constitution requires, and a foreign-law guarantee over assets in China will still be enforced through a Chinese court.

InstrumentSpeed of recoveryWhat it depends on
Contractual set-offImmediateA clause wide enough to cover disputed sums and other contracts
RetentionAt the end of the warranty periodA defined release condition and accurate accounting
Parent guaranteeWeeks to monthsThe parent’s solvency and valid corporate authorisation
Bank guarantee or standby creditDays, on presentationWording that matches the claim documentation exactly
Deposit or prepayment offsetImmediateA deposit actually held
Judgment or awardMonths to yearsAssets still being there when enforcement begins

Whichever instrument is used, keep a claim ledger. Debit notes should be issued as each loss is quantified, reconciled against invoices, and recorded in the statements sent to the supplier. A set-off that appears for the first time in a letter from lawyers, two years after the loss, looks like an afterthought and is treated as one.

The defences you will meet

The supplier’s first answer is almost always that the defect came from the buyer’s design, the buyer’s specification, or the buyer’s handling. The second is that notice was late. The third is that the loss is exaggerated.

Each has a contractual answer. Design responsibility should be allocated explicitly: who approves the design, who approves the process, who signs off the first article, and who bears the risk of a design that cannot be manufactured at the quoted cost. Notice periods should be long enough to be operable — fourteen days is common and often too short for a latent failure mode. And the loss should be documented as it happens, not reconstructed after the dispute begins.

Three further defences appear often enough to plan for.

Acceptance. The supplier will produce the signed delivery note, the inspection certificate, the approved sample and the paid invoice, and argue that the buyer accepted the goods. The answer is a contract that distinguishes apparent from latent defects, and an inspection record that shows what was and was not checked.

The acceptance quality limit. If the contract permits a stated defect rate, the supplier will argue that a failure rate inside the limit is conforming. That is correct, and it is why the acceptance standard and the buyer’s commercial expectations must be reconciled before signature rather than after the first bad lot.

Agency and identity. Some suppliers will say they merely introduced the buyer to the actual factory, or that they acted as trading agent. The answer is the contract: who invoiced, who received payment, who issued the quality certificate and who is named as seller. Where a trading company sits between the buyer and the factory, the buyer should require the trading company to disclose the factory, and should consider a direct quality warranty from the factory alongside the trading company’s obligations.

Settlement architecture

Most quality claims settle, and the terms of settlement matter as much as the claim. A negotiated settlement typically takes one to three months where the evidence is clear and the supplier wants to keep the relationship, which is why the evidence pack assembled in the first fortnight is also the negotiation pack.

A credit note against future orders is only worth having if there will be future orders. A replacement batch needs a delivery date, an acceptance test and a consequence for failure. A cash refund needs a payment schedule and a default acceleration clause. Where the supplier is thinly capitalised, a parent guarantee or a retention against outstanding invoices is worth more than a promise.

Where the relationship is to continue, the settlement should also fix the process: a corrective action plan, a first-article approval for the next batch, an increased inspection level for a defined period, and a right to terminate if the defect recurs.

Where supply ends, the settlement should address the return of tooling, the transfer of open orders, warranty obligations for products already sold, and confidentiality of the terms. A clean exit is worth more than a marginally better price.

Three drafting points are routinely missed. The release should be specific rather than general: a release of “all claims arising from the supply relationship” ends claims the buyer has not yet discovered, and should be resisted. The settlement should say whether it is a price adjustment or compensation, because the two are treated differently for invoicing and tax, and a credit note that does not match the accounting treatment creates a second dispute. And the settlement should record that it is without admission of liability if the supplier needs that language to sign, since the concession costs the buyer nothing and shortens the negotiation.

Forum, procedure and enforcement

The remedy is only as good as the forum. A Chinese court offers lower cost, faster preservation and direct enforcement against Chinese assets, at the price of publicity and a Chinese-language process. A China-seated arbitration offers confidentiality and a tribunal with technical expertise, and enforces through the same courts. A foreign-seated award is enforceable in China under the New York Convention, but the enforcement stage still runs through a Chinese court, which adds months.

RouteTypical first-instance timingRelative costConfidentialityEnforcement in China
Chinese people’s courtSix to twelve months, plus six to nine on appealLowest filing cost, scaled to the claimPublic judgment in most casesDirect
Arbitration seated in ChinaSimilar to a first-instance judgmentHigher, because tribunal fees are time-basedConfidentialThrough the court, on application
Arbitration seated abroadSimilar, plus translation and travelHighestConfidentialThrough the court under the New York Convention
Foreign courtVariesHighPublicLimited; recognition depends on treaty or reciprocity

Court. The contract may choose a court with a connection to the dispute — the defendant’s domicile, the place of performance, the place of contracting, the plaintiff’s domicile or the location of the subject matter — and a clause naming a court without such a connection may be ineffective. Most foreign-related commercial claims of moderate value start in a basic-level people’s court, with higher-value claims going to the intermediate level under local thresholds.

Preservation. Asset preservation is often decisive. The court can freeze bank accounts, inventory and receivables, before or during proceedings, on application and usually against security. Where the supplier may move assets once it learns of the claim, the application should be prepared before notice is served rather than after. Preservation is the single practical advantage a Chinese court has over arbitration, and it is the reason many buyers choose court despite the publicity.

Procedure and language. Proceedings are conducted in Chinese. A foreign party needs a Chinese-authorised representative, and corporate documents from abroad need to be notarised and, depending on the jurisdiction, legalised or apostilled; China’s accession to the Apostille Convention has simplified this for documents from member states. Deadlines for evidence and for submissions are fixed by the court and are shorter than most foreign litigants expect.

Costs. Court fees are charged on a scale related to the claim value and are borne by the losing party in principle. Attorney fees are generally each party’s own cost unless the contract provides otherwise or the arbitration rules allow an allocation. An arbitration clause that expressly provides for the recoverability of legal costs is worth more than it appears at the drafting stage.

Where the supplier holds only Chinese assets — plant, inventory, receivables — the practical question is not which forum is more neutral, but which forum gets to the assets first.

Enforcement is a separate exercise. After judgment or award, the buyer applies to the enforcement division of the court, which investigates assets through the banking and property systems, can freeze and deduct from accounts, can restrict the legal representative’s high-value consumption and can place the company on the list of dishonest judgment debtors. That list is often the most effective lever in a dispute with a private factory, because it affects the owner’s ability to obtain credit and to travel.

Contract architecture

A quality claim begins with the contract, and most contracts are drafted to describe the product rather than to allocate the risk of it failing.

Four provisions do most of the work. A technical specification annexed to the agreement, with numbers, tolerances, test methods and a sampling plan. An inspection and acceptance procedure, with a defined period, a defined method and a defined consequence of acceptance. A warranty period that runs from delivery or from first use, whichever is later, with a clear statement of what it covers. And a remedies clause that specifies repair, replacement, price reduction and termination, in an order of precedence.

The specification is the provision that determines whether a defect exists. A contract that says “in accordance with the drawings” and attaches drawings with no tolerances has not specified anything that can be measured. A contract that specifies a defect rate — “not more than 0.5 per cent per lot, measured by the attached sampling plan” — gives both parties a number to work with.

Inspection, acceptance and deemed acceptance. Chinese sales law permits the parties to agree an inspection period and to treat silence as acceptance. A clause providing for inspection within fourteen days and deemed acceptance afterwards is generally enforceable, and it is the clause that defeats most late claims.

The clause should be workable, not merely favourable. Fourteen days is enough to inspect packaging and visible defects; it is not enough to detect a failure mode that appears after two hundred hours of operation. The agreement should therefore distinguish between apparent defects, which are subject to the inspection period, and latent defects, which are not.

A latent defect clause should define what counts as latent, state that notice must be given promptly after discovery, and preserve the buyer’s remedies for the warranty period. Without it, the supplier will argue that the inspection period barred the claim, and the argument will be difficult to answer.

The clocks. Four periods run at once, and a claim fails if any one of them expires before the claim is made.

ClockStartsHow longWhat defeats the claim
Inspection periodDelivery, or arrival at destinationAs agreed; fourteen days is commonDeemed acceptance where no notice is given
Warranty periodDelivery, or first use where laterAs agreedExpiry without notice of the defect
Outer notice period for latent defectsDeliveryGenerally two years unless a longer warranty appliesNotice after the outer period
Limitation periodThe date the buyer knew or ought to have known of the defectThree yearsExpiry, unless interrupted by acknowledgement or proceedings

The limitation period for a quality claim is generally three years from the date the buyer knew or ought to have known of the defect. That period is longer than most buyers expect and shorter than some assume. Where the defect is latent, the clock starts on discovery, not on delivery. Where the defect is apparent, the clock starts on delivery, and the inspection period may shorten it further.

The interaction between the inspection period, the warranty period and the limitation period is where claims are won and lost. A buyer that inspects late, notifies late and sues late has three problems, and the supplier will raise all of them. A buyer that inspects promptly, notifies in writing and preserves the evidence has one problem: proving the defect.

Remedies, caps and carve-outs. The remedies clause should rank the remedies, define when termination becomes available, and state whether liquidated damages are the exclusive remedy for the failure they address or an addition to it. The liability section should carve quality, IP and confidentiality breaches out of any cap, and should not exclude the buyer’s downstream liability where the purpose of the goods has been disclosed.

Insurance and recourse up the chain

Product recall, product liability and contingent business interruption insurance may cover part of a quality loss, and the buyer should check the position before assuming that the supplier will pay.

A recall that is required by a regulator or a customer may be covered, subject to the policy’s notification and cooperation conditions. A line stoppage caused by defective components may be covered under contingent business interruption, but the policy usually requires the interruption to follow a physical loss at a supplier’s premises. Where insurance responds, the insurer will pursue subrogation against the supplier, and the buyer should preserve the evidence and notify promptly, because a late notification may prejudice the claim. Insurance is often faster than litigation and should be assessed in the first week, not after the claim has been pleaded.

The supplier that delivered the defective goods may itself be a victim of a component failure, and the buyer’s claim should anticipate the chain. The supply agreement should require the supplier to disclose the identity of critical component suppliers and to pass through the warranties it receives. Where the supplier refuses, the buyer should consider buying the critical components directly or requiring approved sources.

A pass-through warranty is only useful if it is enforceable. A warranty from a component maker to the assembler may not extend to the end buyer, and the buyer’s route is through the assembler, which may be insolvent by the time the claim is made.

Where the defective component is several tiers down, the buyer’s contractual relationship is with the tier-one supplier, and the practical difficulty is obtaining evidence from the lower tiers. Three measures help: a contractual right to audit the supplier’s subcontractors with a flow-down obligation; a requirement that the supplier notify any change of subcontractor or process; and a right to require the supplier to join the lower-tier supplier in any quality investigation. Without them, the buyer’s claim is limited to the tier-one supplier’s contractual liability, which may be capped at the value of the order.

Cross-border evidence adds a further layer. Where the buyer is outside China, the evidence will be in two languages and the proceedings will be in one. Documents relied on in a Chinese court must be translated into Chinese, and the translation must be certified. A technical report in English that is translated loosely will be attacked, and the attack will succeed where the numbers do not match. The practical step is to prepare the technical file in a form that can be translated: consistent terminology, numbered paragraphs, tables rather than prose, and a glossary.

What to do next

  1. Annex a specification that can be tested, with tolerances, a sampling plan and a dated revision history.
  2. Draft the inspection clause so that it distinguishes apparent from latent defects, and extend the period in writing when the investigation needs more time.
  3. State the intended use and the consequence of failure, with volumes and dates, so that consequential loss is foreseeable.
  4. Quarantine the batch and stop any rework, return or resale until the evidence is secured.
  5. Send written notice within the contractual period, to the contracting entity, identifying the order, the batch, the specification and the measured failure rate, with rights reserved.
  6. Invite a joint inspection, offer dates, and record any refusal in writing.
  7. Quantify the loss as it occurs, line by line, with the invoice or record that proves each line.
  8. Read the set-off, retention and guarantee provisions before the dispute, and keep a claim ledger from the first debit note.
  9. Choose the forum by where the assets are, and prepare the preservation application before the supplier learns of the claim.
  10. Where a settlement is reached, document the corrective action, the consequence of recurrence and the scope of the release, not only the money.

A quality claim against a Chinese supplier is decided long before the hearing, by the specification that was annexed, the notice that was sent and the records that were kept. Buyers who treat those three as legal work rather than administrative work recover most of what they lose. The firm’s manufacturing and supply chain practice handles specification review, quality clauses, defect claims and enforcement, and the commercial contracts team drafts the supply agreements in which these questions are settled. Three related guides are worth reading alongside this one: tooling ownership and recovery, protecting your design in Chinese contract manufacturing, and sourcing AI hardware from China.

Frequently Asked Questions↑ Back to article

How long do we have to notify a Chinese supplier of a defect?

The contract decides. If it sets an inspection period, a failure to notify within that period is generally treated as acceptance of the goods, subject to latent defects that could not have been discovered on reasonable inspection. Where the contract is silent, the Civil Code requires notice within a reasonable period after discovery, and in any event within two years of delivery unless a longer quality warranty applies. In practice, notice within days, in writing, with evidence attached, is what preserves the claim.

Do we have to return the goods to claim a refund?

Not necessarily, and often you should not. Returning defective goods destroys the evidence and hands the supplier the only asset it needs to argue about. Retain the goods, seal them, photograph and video the inspection, keep retention samples, and offer the supplier a joint inspection. A refund or price reduction claim can proceed without physical return until the remedy is agreed or ordered.

Can we claim lost profits from the supplier, or only the price of the goods?

Chinese law allows damages for losses caused by the breach, including lost profits, where the loss was foreseeable at the time of contracting. In practice, consequential loss claims succeed when the contract records the purpose of the goods and the downstream commitment — for example, that the components are for a production line with a stated output, or for a customer order with a delivery date. Without that record, the supplier will argue the loss was unforeseeable.

Is a penalty clause enforceable in China?

Yes, with adjustment risk. Liquidated damages are enforceable, but a party may ask a court or tribunal to reduce an amount that is excessively higher than the actual loss, and the courts commonly use thirty per cent above the proven loss as a reference point. A penalty that is purely punitive, with no relationship to likely loss, is the most vulnerable. A penalty tied to delay, replacement cost or production downtime is easier to defend.

Should we sue in a Chinese court or arbitrate?

It depends on where the assets are and what the contract says. A Chinese court is faster to preservation and cheaper, but judgments are public and the process is in Chinese. Arbitration offers confidentiality and a neutral seat, but a foreign award still has to be enforced through a Chinese court. If the supplier holds only Chinese assets, a China-seated arbitration or a Chinese court is usually the more practical route.

What if the supplier says the defect was caused by our design?

That is the most common defence, and it is why the specification matters. A contract that makes the supplier responsible for manufacturing to your design should still allocate responsibility for manufacturability, process capability and first-article approval. If the supplier proposed the process or the material, the defence weakens. An independent technical appraisal, agreed in advance or ordered by the tribunal, usually decides the question.

How long does a quality claim against a Chinese supplier take?

A negotiated settlement typically takes one to three months if the evidence is clear and the supplier wants to keep the relationship. A Chinese court case at first instance commonly takes six to twelve months, with appeal adding six to nine. Arbitration seated in China runs on a similar timeline to a first-instance judgment, but enforcement adds a further stage.

Geason Law Offices AI Industry Research Group | Reviewed by He Qianggao (Lawyer License No. 14403201310092337, 10+ years of practice)