You have a working prototype, a Chinese contract manufacturer quoting a competitive price, and a term sheet that assumes you ship within twelve months. What you do not yet have is a structure that survives contact with Chinese regulation. AI hardware stacks the ordinary problems of manufacturing on top of compute export control, radio certification, device data collection and foreign investment screening. Each has its own regulator, filing and failure mode, and they are not sequenced the way a product team would sequence them. This guide sets out the order.

Who this guide is for

Stage: Execute. Use this when an entity, a factory and a first purchase order are actually on the table.

Entity setup and foreign investment access

Most foreign founders use a wholly foreign-owned enterprise (WFOE) — a Chinese limited liability company owned entirely by a foreign parent, with no Chinese shareholder required. For AI hardware manufacturing this is usually the right vehicle, because manufacturing of most electronic hardware is not on the Special Administrative Measures for Foreign Investment Access, commonly called the Negative List. If your business includes a cloud platform, an app store or another value-added telecom service, foreign equity in the licensed company is typically capped at 50%, and some categories are closed. The practical answer is often two entities: a manufacturing WFOE and a separately licensed or partnered service entity.

Register the business scope carefully. It must cover research and development, manufacturing, sales and import and export where relevant. A scope limited to “technology consulting” will not support a factory lease, a customs registration or a certification application. Registered capital is a subscription commitment, not a fee, but it is examined for manufacturing permits.

Manufacturing adds two requirements that software founders underestimate. First, a site with the correct zoning and an environmental impact assessment (EIA) filing or approval, administered by the local ecology and environment bureau. Second, safety, fire and occupational health acceptance before production. Build both into site selection; retrofitting later is slow and expensive. Decide early which entity holds the product certificates, since most certifications require a Chinese-registered applicant.

Research, development and the contract stack

Service inventions and joint development

Chinese law separates a service invention, created in the course of employment or mainly using the employer’s resources, from a free invention. A service invention belongs to the employer, but the employer must reward the inventor and pay remuneration when the patent is exploited. With no internal policy, the statutory default applies and is often more generous than founders expect. Put an invention policy and an assignment clause in every employment contract and document the reward.

Joint development with Chinese universities is where ownership quietly drifts. Institutions commonly insist on owning foreground IP or on joint ownership, and joint ownership under Chinese law is awkward: each co-owner may generally exploit the patent and grant non-exclusive licences, while assignment needs consent. If your algorithm is the core asset, keep it outside the joint-development scope, define background IP as yours, and license only what the project needs.

NRE, tooling and mass production

AI hardware rarely fails because the factory cannot build it. It fails because the documents do not say who owns what when the relationship ends. Structure the deal in four layers, each with one job.

LayerWhat it coversCommon failure
NRE and development agreementDesign deliverables, milestones, acceptance, ownership of outputBuyer pays for development but the supplier keeps the design
Tooling and equipment scheduleMoulds, fixtures, test jigs, title, location, returnNo written record, so tooling is held at exit
Supply agreement and purchase ordersPrice, volume, capacity, delivery, warranty, liabilityFrame agreement and PO conflict with no precedence clause
Quality agreementSpecifications, sampling, first-article approval, audits, change controlProcess changes made without written approval

Non-recurring engineering (NRE) is the phase where you pay a supplier to develop something. State expressly that you own the design output, that the supplier assigns it on payment, and that it may not be reused for other customers. Define acceptance per milestone and withhold a meaningful final payment until the design package — drawings, source files, test specifications — is delivered.

Tooling is the most litigated asset in Chinese manufacturing. State that you own it, that the supplier holds it as bailee, mark it as your property, and keep a schedule with identification numbers and replacement value. A supplier in lawful possession may assert a lien for unpaid processing fees, so keep payments current. For pilot and mass production, agree capacity reservation, allocation during shortage, last-time-buy rights and a transition obligation if you move the product.

Certification: CCC, SRRC and network access

A device sold in China normally needs three approvals, which are routinely confused.

China Compulsory Certification (CCC, known as 3C) is a mandatory safety and conformity mark for products inside the CCC catalogue, administered by the State Administration for Market Regulation (SAMR). Information technology equipment, power supplies and many electrical components fall inside it. Testing must be performed by a designated laboratory, the certificate is held by a Chinese entity, and there is a factory inspection. Certification is site-specific, so a new factory can trigger a new file.

Radio type approval from the State Radio Regulation Committee (SRRC), now administered by the Ministry of Industry and Information Technology (MIIT), is required for any device with a radio transmitter — Wi-Fi, Bluetooth, cellular, ultra-wideband or radar. Using a pre-approved module simplifies the file considerably. A network access licence is separately required for terminal equipment connected to the public telecommunications network, typically cellular devices.

Then there is the software layer. If the device ships with a recommendation algorithm, an algorithm filing may be needed. If it offers generative AI features to the public in China, the Generative AI Service Measures apply and output must be labelled under the AI-generated content labelling rules. If the companion cloud service is a network operator, multi-level protection scheme (MLPS) grading and filing apply. Budget for these as product compliance, not legal overhead.

Export controls, compute and device data

China’s Export Control Law, together with the dual-use items regulations that took effect in December 2024, controls the export of listed items, software and technology, and has been extended to certain critical minerals and rare earths. If you buy chips, accelerators or modules from a Chinese supplier, ask for the classification, licence status and end-use declaration in writing. Do not accept “it is a commercial product” as an answer.

Foreign controls cut the other way. US rules can reach items made outside the United States that contain controlled technology or are produced with controlled equipment, and entity-list restrictions determine who may receive certain chips. A Chinese supplier may be unable to ship to you, or may ship something your own jurisdiction will not let you import. Allocate the risk in the contract: treat a denied licence as a defined event with notice, suspension and termination rights.

Device data is the second exposure. A connected AI device collects video, audio, location, biometric or industrial process data. Under the Personal Information Protection Law (PIPL), biometric and location data used to identify a person is sensitive personal information and needs separate consent and a necessity assessment. Facial recognition in public spaces is separately regulated and restricted, and industrial data from a factory deployment may be assessed as important data. Moving device data out of China requires one of the statutory routes — a security assessment by the Cyberspace Administration of China (CAC), a standard contract filed with CAC, or certification — and the threshold depends on volume and sensitivity. Design the data flow before the hardware; that architecture drives compliance cost more than any document.

Financing, VIE and the IP sequence

AI hardware is capital-intensive, and the structure should follow the assets. If your China business is manufacturing and R&D, a directly held WFOE is usually cleaner than a variable interest entity (VIE). The VIE was built for sectors where foreign equity is prohibited or capped, notably value-added telecom. It rests on contracts rather than ownership, and its enforceability is uncertain in a Chinese court. For a company that owns plant, tooling and a CCC certificate, a VIE adds friction without adding much. Where a VIE is used because the service layer is licensed, keep manufacturing and IP outside it and take advice on China Securities Regulatory Commission (CSRC) listing filings.

Investment terms need localising. Redemption and liquidation preference rights are common in term sheets but must be drafted to be enforceable in China, where capital reduction and foreign exchange rules constrain how money actually leaves. Employee equity is usually held through limited partnerships, and the tax treatment should be modelled before promises are made.

IP layout should follow the product, not the fundraising calendar. File Chinese patents before public disclosure at a trade show or in a datasheet, and use the twelve-month Paris Convention window for PCT and foreign filings. Register trademarks for hardware, software and SaaS, and register copyright in firmware where it helps evidence ownership. Keep process know-how as trade secrets with access controls, because a patent teaches a competitor the recipe.

PhaseCorporate and financingIP and contractsProduct compliance
0–3 monthsEntity, business scope, bank and tax accountsEmployment assignment and invention policyCertification roadmap, lab booking
3–9 monthsSite, EIA, factory permitsNRE and tooling agreements, NDA stackCCC and SRRC files opened, module selection
9–18 monthsFirst institutional round, ESOP platformDesign assignment perfected, patent filingsNetwork access licence, algorithm filing, MLPS
18 months+Offshore holding review, VIE only if neededPCT and foreign filings, trademark portfolioData export route, OTA and labelling processes

What to do next

  1. Map the entities — manufacturing WFOE and service entity — and decide which one holds the certificates.
  2. Confirm the negative list position for every activity, including any cloud or app service.
  3. Put an invention policy and assignment clause in place before the first engineer starts.
  4. Negotiate NRE ownership and a tooling schedule before paying any development fee.
  5. Chart the certification path for CCC, SRRC and network access, and book designated labs early.
  6. Obtain written export control classifications from every Chinese supplier of chips and modules.
  7. Draw the device data flow and choose a cross-border transfer route before launch.
  8. Test the financing structure against PRC enforceability, not only investor preference.

This article reflects the position as of late 2026. Certification catalogues, export control lists and data rules change frequently, so confirm current requirements with counsel before committing capital.

Frequently Asked Questions↑ Back to article

Do we need a Chinese entity before applying for CCC certification?

In practice yes. The CCC applicant and certificate holder is normally a Chinese-registered legal person, so the entity must exist, with a business scope covering the product, before the certification file is opened. Setting up the entity late is a common cause of a delayed hardware launch.

Can a foreign company own 100% of an AI hardware manufacturer in China?

Usually yes, because manufacturing of most electronic hardware is not on the foreign investment negative list. The exception is a connected service that qualifies as a value-added telecom service, where foreign equity is typically capped at 50%, which is why founders often split manufacturing and service into separate entities.

Who owns inventions created by our Chinese engineering team?

Inventions made in the course of employment, or mainly using the employer's resources, are service inventions that belong to the employer. The employer must still reward the inventor and pay remuneration when the patent is exploited, so an invention policy and assignment clause should be in place before the team starts.

Is a VIE structure still necessary for an AI hardware startup?

Rarely. The VIE was designed for sectors closed to foreign equity, mainly value-added telecom, and it rests on contracts rather than ownership, which is less reliable in a Chinese court. For a company holding plant, tooling and a CCC certificate, a directly held WFOE is usually cleaner.

Does Chinese export control apply to chips we buy from a Chinese supplier?

It can. The Export Control Law and the dual-use items regulations cover listed items, software and technology, and controls extend to certain critical minerals and rare earths. Ask the supplier for the classification, licence status and end-use declaration in writing rather than relying on a verbal assurance.

Which certifications does a connected AI device need to be sold in China?

Typically three: CCC for safety conformity, SRRC type approval for any radio transmitter, and a network access licence for terminals connected to the public telecom network. Software features may add an algorithm filing, generative AI obligations or a multi-level protection scheme filing for the companion cloud.

How can we move device data out of China legally?

You need one of the statutory transfer routes: a security assessment by the Cyberspace Administration of China, a standard contract filed with the regulator, or certification. Which route applies depends on data volume, sensitivity and whether the data is assessed as important data, so map the device data flow before launch.

Geason Law Offices AI Industry Research Group | Reviewed by He Qianggao (Lawyer License No. 14403201310092337, 10+ years of practice)